Storage

Goose Gear Toyota Tacoma Second Row Seat Delete for Double Cab Toyota Tacoma Trucks

The second row seat delete system is designed to create a flat platform that you can use to secure your gear, for the dogs bed and can also be used to store your refrigerator of cooler. Later options will include a drawer system that will open out through the open vehicle door and will also include a Bullet Lined top plate for the drawer that has an access door so you can open the drawer and then reach through the drawer into the factory storage cubby below the rear seat.

40% and Non Subwoofer 60% seat deletes come with the back wall panel too. The Subwoofer version of the 60% delete does not come with the back panel.

Images shown include both the 40% and 60% options but are sold separately.

We will also have a replacement back wall section coming out that will provide ample space to secure other items and will clean up the back wall since the factory plastics on the back of the cab wall have to be removed for installation.

40% delete is for the drivers side of the vehicle and comes in one variation for all 2nd and 3rd gen rigs.

60% delete is for the passengers side of the vehicle and comes in two versions, one to go around the factory subwoofer and another version for those wishing to remove or that do not have the factory subwoofer option.

Note: Drawer must be purchased separately.

Goose Gear Toyota Tacoma Second Row Seat Delete for Toyota Tacoma Access Cab Trucks

The second row seat delete system is designed to create a flat platform that you can use to secure your gear, for the dogs bed and can also be used to store your refrigerator of cooler.

Currently available only for Access Cab models with rear seats.

Images shown include both the drivers and passengers side delete platforms.

Currently available for 2nd Gen Tacoma's, 3rd Gen will be available later this year.

This is our Goose Gear Single Drawer Module designed specifically for the Tacoma Second Row Delete Plate System. This module size fits on the drivers side Second Row Delete Plate.

This module fits on the Drivers Side of the Vehicle.

The top plate of this drawer is a Bullet Lined Birch top with an access door in the top allowing you to open the drawer, remove the top access hatch and then get into the Toyota factory storage compartment that was below the second row seat.

They feature locking compression latch. It features Baltic Birch, 11 ply dovetail finished drawer boxes, mounted to 350# rated full extension drawer guides for smooth and durable performance. These modules are built to last at the least amount of weight possible.

The 19 3/16" wide x 21" deep version comes in (2) drawer heights:

-- 21" Deep Drawers ---

• 19 3/16""W x 8"H x 21"D
• 19 3/16""W x 10"H x 21"D

This is our Goose Gear Single Drawer Module designed specifically for the Tacoma Second Row Delete Plate System. This module size fits on the Passengers side Second Row Delete Plate. 

The top plate of this drawer is a Bullet Lined Birch top with an access door in the top allowing you to open the drawer, remove the top access hatch and then get into the Toyota factory storage compartment that was below the second row seat.

They feature locking compression latch. It features Baltic Birch, 11 ply dovetail finished drawer boxes, mounted to 350# rated full extension drawer guides for smooth and durable performance. These modules are built to last at the least amount of weight possible.

The 19 3/16" wide x 32" deep version comes in (2) drawer heights:

-- 32" Deep Drawers ---

• 19 3/16""W x 8"H x 32 1/2"D
• 19 3/16""W x 10"H x 32 1/2"D

The Goose Gear Tacoma System Base Plate for Total Chaos Bed Stiffeners. This is the first step in getting your Tacoma ready for adventure storage. The Base Plate is made from industrial grade 12mm Baltic birch and is 100% coated with professionally sprayed on bed liner material.

Choose from 5' Short Bed or 6' Long Bed

Designed for 2nd and 3rd Gen Tacoma's.

The Goose Gear Alu-Cab Canopy Camper system base plate for Tacoma 2nd and 3rd Generations. The Base Plate is designed for use with the Alu-Cab Canopy Camper and is precision CNC machined and comes complete with pre-installed anchors for Tacoma Modules for an easy bolt in system that is secure and strong. The Base Plate is made from industrial grade 12mm Baltic birch and is 100% coated with professionally sprayed on bed liner material.

Choose from 5' Short Bed or 6' Long Bed

Designed for 2nd and 3rd Gen Tacoma's.

Tacoma System Module Top Plate without access doors

This top plate is designed to create a smooth wall to wall deck without any access doors works great with Wheel Well Drawer.

Requires purchase of Goose Gear Tacoma System Plate and Tacoma Full Width Drawer Top Plate.

Select your options:

1. Width of Module
2. Length of Module
3. Location: Driver or Passenger Side

Designed for 2nd and 3rd Gen Tacoma's.

Goose Gear Tacoma System Module Top Plate with 3 Access Doors.

This top plate is designed for easy access into a Tacoma Cabinet.. By adding 3 access doors you can easily access your Tacoma Cabinet from inside the vehicle without having to open the tailgate. This is an ideal system for people planning to use there Tacoma System in a camper shell, as a sleeping platform, Habitat or FlipPac with easy access from inside the bed of the truck.

Requires purchase of Goose Gear Tacoma System Plate and Tacoma Cabinet Module.

Select your options:

1. Width of Module
2. Length of Module
3. Location: Driver or Passenger Side

Designed for 2nd and 3rd Gen Tacoma's.

Price is for one top plate for a single module.

Goose Gear Tacoma System Module Top Plate with 1 Access Doors.

This top plate is designed for easy access by adding 1 access door you can easily access the space between the wheel well and tailgate from inside the vehicle. Works very well with Tacoma System Infill Panels. Serves as a great sleeping platform as well.

Requires purchase of Goose Gear Tacoma System Plate and Module.

Select your options:

1. Width of Module
2. Length of Module
3. Location: Driver or Passenger Side

Designed for 2nd and 3rd Gen Tacoma's.

Price is for one top plate to cover a single module.

This Goose Gear Plate System fits current model Ram Trucks with a 6.5' bed.

The Colorado Second Gen Rear Seat Deletes are designed to be 100% bolt in and all you to remove the second row seats as needed.

They are offered in 60% Drivers and 40% Passengers Seat options. You can do one or the other or even both rear seat deletes for a 100% platform. Both the 40 and the 60 feature two doors for access to the storage below the plate.

AluCab Canopy Camper Drawers feature dovetailed Baltic Birch drawer boxes with full extension drawer guides. This unit fits both the 5' and the 6' Chevy Colorado's and will also fit on either side of the vehicle, Passengers and Drivers side.

AluCab Canopy Camper utility cabinet for the Chevy Colorado feature the same construction we are known for. AluCab Canopy Camper Utility Modules feature a lift off lid. These modules are the units that are designed to be installed in line with the Double Drawer Module between the Double Drawer Module and the cab of the truck. They are offered in Passenger and Driver Configurations for proper fitment.

AluCab Canopy Camper utility cabinet for the Tacoma feature the same construction we are known for. AluCab Canopy Camper Utility Modules feature a lift off lid. These modules are the units that are designed to be installed in line with the Double Drawer Module between the Double Drawer Module and the cab of the truck. They are offered in Passenger and Driver Configurations for proper fitment.

Module Dimensions
5' Bed 28.5"w x 18.5"h x 13"d
6' Bed 42"w x 18.5"h x 13"d

AluCab Canopy Camper Drawers feature dovetailed Baltic Birch drawer boxes with full extension drawer guides. This unit fits both the 5' and the 6' Tacoma's and will also fit on either side of the vehicle, Passengers and Drivers side.

Module dimensions 25"w x 18.5"h x 13"d

Product images shown with TrekPak divider system and other camping items and are not included in drawer purchase.

The Goose Gear Alu-Box Top Plate Kit takes the lightweight and rugged Alu-Box aluminum storage boxes to the next level. It turns them into a solid step and gives them a solid top of sitting upon at camp. It also makes a great table when sitting around the campfire.

NEW DESIGN - Allows for proper stacking of Alu-Box's too.

Kit includes: top plate covered in Bullet Liner coating on all sides, stainless steel hardware for mounting

Installation requires drilling four holes into your Alu-Box to secure the top plate.

The Alu-Box is sold separately and not included with the kit.

The CampKitchen Utensils Box provides a great space next to your Cook Partner Stove for organizing and storing your utensils, spices, plates etc.

It comes in four sizes, Small for 22" Cook Partner Stoves, Medium for 18" Cook Partner Stoves and Large for 9" Cook Partner Stoves. The Extra Large version is designed to completely fill the stove tray and does not leave room for a stove.

The Small size is designed to fit next to a Cook Partner 22" Double Burner stove and measures 3-1/4"w x 14-1/2"d x 3-3/8"h

The Medium Size is designed to fit next to a Cook Partner 18" Double Burner stove and measures 7"w x 14-1/2"d x 3-3/8"h

The Large Size is designed to fit next to a Cook Partner 9" Single Burner stove and measures 16"w x 14-1/2"d x 3-3/8"h

The Extra Large Size is designed to completely fill the stove tray and does not leave room for a stove, measures 25-5/8"w x 14-1/2"d x 3-3/8"h

Goose Gear anchor packs are laser cut from 316 Stainless Steel for superior strength and corrosion resistance.

There are two designs, slotted and round. They are available as a kit of 4 anchors, slotted or round. They are also available as a kit with mounting hardware to secure them to the Goose Gear Module Extrusion using the convenient "roll-in" anchor. The roll in anchor can be rolled into the extrusion anywhere along the aluminum channel without having to remove any of the corner blocks.

Below is the slot design for 1" webbing and strapping materials.

Below is the round design which features a 9/16" diameter ring for caribeners, rope etc.

Both styles use 1/4-20 or 6mm bolts for securing.

Goose Gear Anchor Packs with mounting hardware for Goose Gear Modules.

Small table is perfect for around the fire for your drinks or appetizers. The table surface is made of a dimpled and polished stainless steel surface with complimenting black polycarbonate corners, and is supported by a set of black powder coated aluminum folding legs. The dimpled surface not only looks great, it increases the material rigidity allowing for a thinner and lighter surface. The aluminum frame and legs are light and corrosion resistant. And when you are done, it fold up compactly and can even store under your roof rack saving precious interior storage capacity.

Features

Large table has ample room for seating 2 for a meal. The table surface is made of a dimpled and polished stainless steel surface with complimenting black polycarbonate corners, and is supported by a set of black powder coated aluminum folding legs. The dimpled surface not only looks great, it increases the material rigidity allowing for a thinner and lighter surface. The aluminum frame and legs are light and corrosion resistant. And when you are done, it fold up compactly and can even store under your roof rack saving precious interior storage capacity.

Features

Extra Large table has ample room for seating 4 for a meal. The table surface is made of a dimpled and polished stainless steel surface with complimenting black polycarbonate corners, and is supported by a set of black powder coated aluminum folding legs. The dimpled surface not only looks great, it increases the material rigidity allowing for a thinner and lighter surface. The aluminum frame and legs are light and corrosion resistant. And when you are done, it fold up compactly and can even store under your roof rack saving precious interior storage capacity.

Features

• Lightweight, Stainless Steel Dimpled Surface for Strength & Ridigity
• Polished Finish for Rugged Good-Looks & Corrosion Resistance
• Durable, Boxed Aluminum Frame
• Powder-Coated Aluminum Ladder Frame Legs
• Stainless Steel Leg Braces & Hardware
• Compact Legs Stack when Folded to Reduce Thickness

K9 Roof Rack Table Mounting Kit allows you to store your camp table underneath your roof rack. It’s a great way to utilize exterior storage and free up valuable space inside your vehicle. A roof mounted camp table is quick and always available. The channels for the kit are designed specifically for the K9 Stainless Steel tables, incorporating their rounded edge in their shape. Made of stainless steel, they are powder coated and lined with outdoor carpet to minimize corrosion and marring of the table. The channels offer slotted mounting locations to increase mounting versatility. The locking bracket is unique to the K9 Roof Rack, utilizing the 6mm slot in the rack edge for fastening. You can widen the channel under the rack to use a large table, or fit 3 small tables in the same space. Or narrow the channels to fit a single medium size table. It’s a perfect way to use that often wasted space under your rack.

Features

Specs.