Storage

The Goose Gear Jeep TJ Plate system is the foundation for adding various Goose Gear Modules, including the CampKitchen, IceBox and drawers.

Overall drawer width is 34-3/8" for side x side modules. If you are using a CampKitchen or an IceBox Module you can also add a single or double drawer module that is 15-3/16" wide. CampKitchen and IceBox Modules can be place on drivers or passengers side with the drawer on either side.

The TJ Plate System is 100% bolt in and allows the use of the factory tie down footman loops in the vehicle floor. As with all of the Goose Gear Plate Systems it also includes pre-installed anchor points for all Goose Gear Modules designed for the Jeep TJ.

CampKitchen 2.1 and 2.3 will fit in the Jeep TJ.

IceBox and Icebox with Top Drawer models that are 25" and 28" depth fit in the Jeep TJ,

Double Drawer Modules must be mounted on the Passenger side of the vehicle to clear the door strike.

The Goose Gear 4Runner 5th Gen Stealth Sleep Package is a complete solution for those wanting a lightweight and minimalist approach to camping. This system is perfect for those looking for maximum space and comfort. The second row seat deletes also provide storage below the deck. By purchasing the combo kit you save $75.00 versus purchasing the items individually.

The package includes the Rear Plate System as well as both of the 2nd row low profile seat deletes.

Stealth Sleep System for the 5th Gen 4Runner without factory slide out tray.

PT4R-5-STD-STEALTH INCLUDES:

PT4R-5-STD
PT4R-5-LOWSL60
PT4R-5-LOWSL40

Stealth Sleep System for the 5th Gen 4Runner with factory slide out tray.

PT4R-5-SLIDE-STEALTH INCLUDES:

PT4R-5-SLIDE
PT4R-5-LOWSL60
PT4R-5-LOWSL40

Stealth Sleep System for the 5th Gen 4Runner with factory 3rd row seat.

PT4R-5-3RD-STEALTH INCLUDES:

PT4R-5-3RD
PT4R-5-LOWSL60-3RD
PT4R-5-LOWSL40-3RD

The Goose Gear 4Runner 5th Gen Stealth Sleep and Storage Package is a complete solution for those wanting a minimalist approach to camping with ample storage. The storage capacity on this layout is quite a bit more than most expect. With storage within the Side X Side Drawers as well as below the elevated second row seat delete platforms. This combo kit is designed around our best selling 10" tall Side X Side Module. By purchasing the combo kit you save $150.00 versus purchasing the items individually.

The kit includes the Rear Plate System, the Side X Side Drawer Module as well as both of the 2nd row standard profile seat deletes.

Stealth Sleep and Storage Package for the 5th Gen 4Runner without factory slide out tray.

PT4R-5-STD-SS INCLUDES:

PT4R-5-STD
PT4R-5-SUVSL60-10
PT4R-5-SUVSL40-10
SXS411036-50

Stealth Sleep and Storage Package for the 5th Gen 4Runner with factory slide out tray.

PT4R-5-SLIDE-SS INCLUDES:

PT4R-5-SLIDE
PT4R-5-SUVSL60-10
PT4R-5-SUVSL40-10
SXS411036-50

Stealth Sleep and Storage Package for the 5th Gen 4Runner with factory 3rd row seat is not available yet.

 With the 4Runner STANDARD PROFILE sleeping platform you can now set up your rig for stealth camping and get comfortable. With the standard profile version you can leave the second row seat backs in place and simply fold them forward, but the seat bottoms must be removed for installation. The good news is that the lower seat section is held in with only two easy access bolts per side. If you remove the seat back as well, you will gain a great deal of additional storage as well as saving weight in your rig.

There are two models and three height options. The first is the Drivers side platform and covers the 40% side of the rear seat. The second is the passengers side platform and covers the 60% side of the rear seat. An access door from the top as well as side access when the passenger doors are open makes for an incredible amount of storage in the center of your vehicle and at the lowest point which is great for vehicle stability.

***The STANDARD PROFILE sleeping platforms for the 5th Gen 4Runner require the Goose Gear Plate and Goose Gear SUV drawer modules in 8", 10" or 12" heights to attach and are not included in this pricing. Does not require cutting or drilling of any part of the vehicle.***

Overall length is 76", our taller clients push the front seats forward and stuff bags or pillows behind the seats to extend the sleeping area.

40% and 60% Sleeping Platforms are designed for 2010-current Toyota 4Runner (without third row seat option only)

The 4Runner sleeping platforms require the rear 4Runner plate system and a drawer module in 8" - 10" or 12" height with the 8" and 10" being the most popular. Plate Systems can be found here 

Trail4r.com Installation Guide

THE 5TH GEN WITH THE THIRD ROW SEAT MODEL 4RUNNERS. THE THIRD ROW DELETE MODEL IS ONLY AVAILABLE IN LOW PROFILE PLATE BASED MODELS.

40% AND 60% Sleeping Platforms are designed for 2010-Current Toyota 4Runner WITH THE 3rd Row Seat Delete Plate and are designed to remain flat and even with the rear plate. As shown in the pictures.

Overall length is 73", our taller clients push the front seats forward and stuff bags or pillows behind the seats to extend the sleeping area.

Includes fasteners and straps to secure sleeping platform to the back of an existing Goose Gear module and floor. Does not require drilling of the vehicle.

In the third row model 4Runner's, the 60% delete is on the Drivers Side and the 40% is on the Passengers side of the vehicle.

All sleeping platforms require the rear plate system for proper installation. As seen here 5th Gen 4Runner 3rd Row Delete Plate

The Goose Gear 4Runner Low Profile Sleeping System

With the 4Runner LOW PROFILE-PLATE BASED sleeping platform you can now set up your rig for stealth camping and get even more comfortable with more interior height. The first model is the Drivers side platform and covers the 40% side of the rear seat which must be completely removed for installation. The second model is the passengers side platform and covers the 60% side of the rear seat which must be completely removed for installation. An access door from the top as well as side access when the passenger door is open makes for a great amount of storage right in the center of your vehicle and at he lowest point which is great for vehicle stability.

***The LOW PROFILE sleeping platforms for the 5th Gen 4Runner do require the Goose Gear Plate but do not require a Goose Gear Storage Module. Does not require cutting or drilling of any part of the vehicle.***

Overall length is 73", our taller clients push the front seats forward and stuff bags or pillows behind the seats to extend the sleeping area.

40% and 60% Sleeping Platforms are designed for 2010-Current Toyota 4Runner (without third row seat option only)

The Goose Gear 4Runner 5th Gen Ultimate Chef Package is a complete camping solution for those that like to cook and have everything they need close by and organized. By purchasing the combo kit you save $200.00 versus purchasing the items individually.

Image shown reflects a single drawer module and not the Double Drawer Module in this combo kit.

The package includes the Rear Plate System, the CampKitchen 2.2 as well as a Double Drawer at a new depth of 30" to match the depth of the slightly deeper CampKitchen 2.2.

Ultimate Chef Package for the 5th Gen 4Runner without factory slide out tray.

PT4R-5-STD-CHEF INCLUDES:

4Runner Rear Plate PT4R-5-STD
CampKitchen 2.2 CK192730
Double Drawer Module DD221930

Ultimate Chef Package for the 5th Gen 4Runner with factory slide out tray.

PT4R-5-SLIDE-CHEF INCLUDES:

4Runner Rear Plate with Slide Out Tray PT4R-5-SLIDE
CampKitchen 2.2 CK192730
Double Drawer Module DD221930

Ultimate Chef Package for the 5th Gen 4Runner with factory 3rd row seat. 

PT4R-5-3RD-CHEF INCLUDES:

4Runner 3rd Row Delete Plate PT4R-5-3RD
CampKitchen 2.2 CK192730
Double Drawer Module DD221930

This package is very similar to the system that we ran in our very own 4th Gen 4Runner. By utilizing a longer 36" drawer we gain storage that is easily accessible and leaves plenty of room on top for your personal gear. Things like sleeping bags, pillows and food. With the ability to store gear on top of the CampKitchen you can keep your entire pantry on top of the CampKitchen. By purchasing the combo kit you save $200.00 versus purchasing the items individually.

Image shown reflects a single drawer module and not the Double Drawer Module in this combo kit.

The package includes the Rear Plate System, the CampKitchen 2.2 as well as a Single drawer module that measures 22-3/16"w x 10"h x 36"d.

Brian's Favorite Package for the 5th Gen 4Runner without factory slide out tray.

PT4R-5-STD-BRIAN INCLUDES:

4Runner Rear Plate PT4R-5-STD
CampKitchen 2.2 CK192730
Single Drawer Module SD221036

Brian's Favorite Package for the 5th Gen 4Runner with factory slide out tray.

PT4R-5-SLIDE-BRIAN INCLUDES:

4Runner Rear Plate with Slide Out Tray PT4R-5-SLIDE
CampKitchen 2.2 CK192730
Single Drawer Module SD221036

Brian's Favorite Package for the 5th Gen 4Runner with factory 3rd row seat. 

PT4R-5-3RD-BRIAN INCLUDES:

4Runner 3rd Row Delete Plate PT4R-5-3RD
CampKitchen 2.2 CK192730
Single Drawer Module SD221036

Image shown has the 8" tall drawer, this system includes the 10" tall module at a 36" depth which matches closely to the height of the wheel wells.

The new Goose Gear FJ Cruiser plate is in its second generation and is now designed to work with the FJ Cruiser Second Row Seat Delete Plates.

The original FJ Cruiser Plate has a different design and will not work with the new second row seat deletes. We have always taken extreme efforts to future proof our systems but on the FJ we did not execute as well as we would've liked. If you have a gen 1 unit and plan on updating to a second row seat delete contact us and we will offer you special pricing for the updated unit.

With the FJ Cruiser plate system you can now easily install and remove Goose Gear Modules with simple hand tools. This system requires the removal of the rear factory slide and carpet kit. Does not require cutting or drilling of any part of the vehicle. Once the plate is installed you now have a clean and flat surface perfect for mounting Goose Gear Modules or your own storage system and accessories. Extremely light weight for its strength, the weight of the plate is less than 39 pounds.

Due to the length of the FJ Cruiser, double drawer modules in 25" depth and side x side modules at 28" depth are the deepest that will fit onto the rear plate system.

If you install a tall cabinet, such as a double drawer cabinet at 22" height, IceBox or CampKitchen on the passenger side it must be installed into the inboard hole pattern which will only leave 19-3/16" available space next to that item. See the image below for more information and feel free to call for more details. Notice that our customer utilized the 3" space to the right of the CampKitchen to store his folding table. The double drawer to the left is a 19-3/16" wide version.

Fits '07 - '14 Toyota FJ Cruiser models

Includes fasteners to secure plate system to vehicle using existing threaded inserts within vehicle body.

If you are planning to use a CampKitchen or an IceBox you will need to buy the following models.

CampKitchen 2.3

IceBox 1.3

IceBox with Top Drawer 1.3

All of the above listed units will only work with the Engel 45 or the Snomaster 42 in the FJ Cruiser due to the short distance between the rear seat and the tailgate.

With the Goose Gear Land Cruiser Plate Systems you can now easily install and remove Goose Gear Modules with simple hand tools. This system requires the removal of the rear factory slide and carpet kit. Does not require cutting or drilling of any part of the vehicle. Once the plate is installed you now have a clean and flat surface perfect for mounting Goose Gear Modules or your own storage system and accessories.

The all new version 2 of the LC80 plate is designed to work with the Goose Gear rear seat deletes and sleep platforms.

Plate systems are designed to accommodate all Goose Gear Modules and include all required anchors pre-installed into the plate to secure the modules.

Includes fasteners to secure plate system to vehicle using existing threaded inserts within vehicle body.

This plate is designed for the complete removal of the vehicles third row of seats.

Extremely light weight for its strength, the weight of the plate runs approximately 45 pounds.

All plate models require the removal of the rear carpet, underlayment foam and some plastic trim pieces. 

Wider Modules for the 80 Series Version 2 Plate.

The version two plate features widened anchor points for Goose Gear Modules. This means you can run an IceBox or a CampKitchen and a single or double drawer that is up to 24-3/16" wide and for single drawers they are now offered in 36" and up to 40" length. If you choose to add standard profile sleep platforms you will need to select the 24-3/16" wide x 8" high x 40" deep modules or the Side x Side Module at 43-3/8" wide x 8" high x 40" deep.

Plate weight is 30 pounds

Goose Gear Land Cruiser 80 Series Second Row Seat Delete / Low Profile Sleeping Platform

With the 80 Series Low Profile sleeping platform you can now remove the second row seats and set up your rig for stealth camping and get comfortable. This version is the optimum height for utilizing your rig as a sleeping platform with the most headroom.

Available in 50% seat delete for the Passenger side and 50% for the drivers side you can run both and get a 100% seat delete. Both seat deletes require the 80 Series Plate System Version 2

The low profile sleep platform requires the removal of the second row seat backs and seat bottoms.

None of the sleep platforms require drilling or cutting and require simple hand tools for installation.

Goose Gear Land Cruiser 80 Series Standard Profile Second Row Seat Delete / Storage and Sleeping Platform

With the 80 Series standard profile sleeping platform you can now remove the second row seats and set up your rig for stealth camping and get comfortable. Below the seat deletes there is a cavernous amount of secure and lockable storage as well. This version is the optimum height for tying into the double drawer modules or the CampKitchen and Single Drawer Modules. These seat delete platforms will bolt directly to either side or both sides of the Ultimate Chef 80 System. 

Both seat delete platforms require either the side x side drawer module or a single drawer and LC80 Utility Cabinet to secure at the rear section of the seat delete. They are designed to work with the 8" tall modules only.

Available in 50% seat delete for the Passenger side and 50% for the drivers side you can run both and get a 100% seat delete. Both seat deletes require the 80 Series Plate System Version 2 and drawer or utility modules mentioned above.

None of the sleep platforms require drilling or cutting and require simple hand tools for installation.

Last five pictures shown reflect the addition of the Ultimate Chef 80 System in the third row seating area and are not including in this product.

We have developed the Goose Gear Ultimate Land Cruiser 80 Camp Package like no other package we have done before.

Purchasing the package includes a discount of $250.00 vs. buying these items separately.

This package uses every available cubic inch we could. Featuring the CampKitchen 2.2 which is great for the most popular fridges. Including the National Luna Weekender 52 and the dual zone 50, The ARB 50 and Engel 45, as well as the Dometic 40 and Snomaster 40. With a tray made to house stoves similar in size to the Cook Partner 9" single burner, 18. 20 and 22" double burners as well. 

The Single Drawer Module is a new WIDER AND LONGER size at 24-3/16" wide x 8" tall and 40" deep.

Behind the CampKitchen 2.2 we have a new mini module that is secure and lockable and that continues the flat storage from the single drawer around the back of the CampKitchen.

The Ultimate Chef Package includes the following items:
PKGLC80-TRD-ULTCHEF

1 - CampKitchen 2.2 CK192730
1 - Single Drawer Module SD240840
1 - Land Cruiser Utility Storage Module behind CampKitchen UC-LC80
1 - Land Cruiser 80 Series Plate System PLC80-V2

We have developed the Goose Gear Ultimate Land Cruiser 80 Camp Package like no other package we have done before.

Purchasing the package includes a discount of $300.00 vs. buying these items separately.

This package uses every available cubic inch we could. Featuring the CampKitchen 2.2 which is great for the most popular fridges. Including the National Luna Weekender 52 and the dual zone 50, The ARB 50 and Engel 45, as well as the Dometic 40 and Snomaster 40. With a tray made to house stoves similar in size to the Cook Partner 9" single burner, 18. 20 and 22" double burners as well. 

The Single Drawer Module is a new WIDER AND LONGER size at 24-3/16" wide x 8" tall and 40" deep.

Behind the CampKitchen 2.2 we have a new mini module that is secure and lockable and that continues the flat storage from the single drawer around the back of the CampKitchen.

This package includes everything in the Ultimate Chef System as well as the Second Row Delete Platforms and Storage.

The package includes the following parts: PKGLC80-SRDTRD-ULTCHEF

1 - CampKitchen 2.2 CK192730
1 - Single Drawer Module SD240840|
1 - Land Cruiser Utility Storage Module behind CampKitchen UC-LC80
1 - Land Cruiser 80 Series Plate System PLC80-V2
2 - Land Cruiser 80 Series Standard Seat Deletes, 1 each - Drivers and Passengers Sides PLC80-SRD-DM-DR50 and PLC80-SRD-DM-PS50

With the Goose Gear Land Cruiser Plate Systems you can now easily install and remove Goose Gear Modules with simple hand tools. This system requires the removal of the rear factory carpet kit. Does not require cutting or drilling of any part of the vehicle. Once the plate is installed you now have a clean and flat surface perfect for mounting Goose Gear Modules or your own storage system and accessories.

The Version 2.1 LC 100 plate is designed to accept the LC 100 seat delete and sleep platform options as well as the new, wider and longer 24-3/16"w x 40"d drawer modules to make use of every possible inch of space.

Plate systems are designed to accommodate all Goose Gear Modules and include all required anchors pre-installed into the plate to secure the modules.

Includes fasteners to secure plate system to vehicle using existing threaded inserts within vehicle body.

Extremely light weight for its strength, the weight of the plate is 39 pounds.

This unit requires the removal of the rear carpet.

Take your Land Cruiser to the next level in minimalist camping with our Stealth Sleep Package. The Goose Gear Stealth Sleep Package includes the rear plate as well as the second row low profile seat deletes/sleeping platforms.

The second row deletes feature lockable storage compartments to keep your valuables secure.

Overall length is 75.5" from front to rear of vehicle with the front row seats in the full back position.

By purchasing the combo kit you save $75.00 over buying the items separately.

This package includes the following: PLC100-STEALTH

LC100 Rear Plate System PLC100-v2p1
LC100 60% Drivers Side PLC100-LowSL-Drivers
LC100 40% Passengers Side PLC100-LowSL-Pass

Please see each products page for additional information.

Goose Gear Land Cruiser 100 Series Seat Delete / Sleeping Platform

With the 100 Series Low Profile sleeping platform you can now set up your rig for stealth camping and get comfortable. This version is the optimum height for utilizing your rig as a sleeping platform with the most headroom.

Available in 40% seat delete for the Passenger side and 60% for the drivers side you can run both and get a 100% seat delete. Both seat deletes require the 100 Series Plate System Version 2. 

The low profile sleep platform requires the removal of the second row seat backs and seat bottoms.

None of the sleep platforms require drilling or cutting and require simple hand tools for installation.

With the Goose Gear Land Cruiser Plate Systems you can now easily install and remove Goose Gear Modules with simple hand tools. This system requires the removal of the rear factory slide and carpet kit. Does not require cutting or drilling of any part of the vehicle. Once the plate is installed you now have a clean and flat surface perfect for mounting Goose Gear Modules or your own storage system and accessories.

Plate systems are designed to accommodate all Goose Gear Modules and include all required anchors pre-installed into the plate to secure the modules.

Includes fasteners to secure plate system to vehicle using existing threaded inserts within vehicle body.

Extremely light weight for its strength, the weight of the plate runs around 47 pounds.

The Goose Gear Land Cruiser Utility/Storage module is designed to fit behind a CampKitchen 2.2 Module and creates the necessary support for the Land Cruiser Drawer Top Plates. By adding this module behind the CampKitchen in your Land Cruiser you gain the correct support for the various flat panels that go on top of the drawer modules.

Includes lockable hatch door that is coated in bed liner material to match our other plate system products.

Land Cruiser 80 and 100 Utility/Storage Module measures 19-3/16"w x 8"h x 10"d

Land Cruiser 200 Utility/Storage Module measures 19-3/16"w x 9-1/2"h and 10"d.

With the Goose Gear GX470 and GX460 plate system you can now easily install and remove Goose Gear Modules with simple hand tools. This system requires the removal of the third row seat and carpet kit. Does not require cutting or drilling of any part of the vehicle.

Once the plate is installed you now have a clean and flat surface perfect for mounting Goose Gear Modules or your own storage system and accessories.

Please select the model that best fits your vehicle.

2003-2009 1st Gen GX470

2010-Present 2nd Gen GX460

2010-Present 2nd Gen GX460 WITH FACTORY 3RD ROW AIR CONDITIONING

Includes fasteners to secure plate system to vehicle using existing threaded inserts within vehicle body.

Current lead-time is 3-4 weeks to ship or pick up.

Extremely light weight for its strength, the weight of the plate is less than 35 pounds.

All plate models require the removal of the rear carpet, underlayment foam and some plastic trim pieces. The complete removal of the third row seats as well.

Due to the layout of the rear plastic in the GX460, two infill panels are provided which require the end user to attach them to the base plate. You can also, at your own option, drill three holes into the side plastic trim to assist in securing the infill panels for a cleaner look.

Goose Gear Winnebago Plate System

The Winnebago plate system is designed with pre-installed anchors points for securing to the Winnebago Revel.

Once the plate system is installed you can simply bolt your Goose Gear modules in place using the pre-installed anchors into the plate.

The Base Plate for the Winnebago Revel is required for proper module installation and can be seen here https://www.goose-gear.com/collections/winnebago-revel/products/winnebago-revel-base-drawer-system 

Product is made from Industrial Grade Baltic Birch and 100% coated with Bullet Liner.

Due to variations in Revel options, the end user is required to locate their own bolting locations for the plate system to secure to the vehicle. Bolts are provided for the installation.

This item requires truck freight shipping due to its size. shipping quotes will be provided. Shipping to a residential address can incur a lift gate fee of $125.00. We recommend shipping to a commercial location with a loading dock or forklift.

The Goose Gear Winnebago Revel Base Drawer System includes 3 drawer modules and a top plate.

The system is available in two lengths: Short and Long. The short system allows for a flat area of approximately 11" behind the drawers just in front of the rear cargo doors. The long system runs from the bulkhead behind the shower and all the way to the rear cargo doors.

Short System - Measures 48-3/4" wide x 43" deep and is 10-1/2" tall.

Long System - Measures 48-3/4" wide x 54" deep and is 10-1/2" tall.

Short System Specifications:

On the drivers side rear there is a drawer featuring 36" lock in / lock out drawer guides as well as a lockable compression latch. This unit measures 18"w x 43"l x 10"h Weight is 51#

On the passengers side rear there is a drawer featuring 28" lock in / lock out drawer guides as well as a lockable compression latch. This unit measures 30-3/4"w x 30"d x 10"h Weight is 49#

In the middle of the unit, facing forward towards the drivers seat is a drawer  featuring 12" heavy duty drawer guides as well as a lockable compression latch. This unit measures 20"w x 13"d x 10"h Weight is 24#

Top Plate weight is 32#

Long System Specifications:

On the drivers side rear there is a drawer 48" featuring lock in / lock out drawer guides as well as a lockable compression latch. This unit measures 18"w x 54"l x 10"h Weight is 58#

On the passengers side rear there is a drawer featuring 36" lock in / lock out drawer guides as well as a lockable compression latch. This unit measures 30-3/4"w x 41"d x 10"h Weight is 56#

In the middle of the unit, facing forward towards the drivers seat is a drawer  featuring 12" heavy duty drawer guides as well as a lockable compression latch. This unit measures 20"w x 13"d x 10"h Weight is 24#

Top Plate is 37#

Both systems have a small area that is not encompassed by a drawer to allow for proper heater ventilation.

Both systems are sold as a complete set only and are not open for customization.

Select Black or Gray Drawer Face

This item requires truck freight shipping due to its size. shipping quotes will be provided. Shipping to a residential address can incur a lift gate fee of $125.00. We recommend shipping to a commercial location with a loading dock or forklift.

*Winnebago and Winnebago Revel are Trademarks of Winnebago

The Goose Gear Winnebago Revel Top Storage System includes 2 compartments with gas strut assisted lifting doors.

The system is available in two lengths: Short and Long. The short system allows for a flat area of approximately 11" behind the drawers just in front of the rear cargo doors. The long system runs from the bulkhead behind the shower and all the way to the rear cargo doors. The image shown below is a picture of a top system installed onto a base drawer system.

Short System Specifications:

Short System - Measures 48-3/4" wide x 43" deep and is 11" tall. Weight is 67#

The Short Storage system is designed to mount to the top of the base drawer system found here https://www.goose-gear.com/products/winnebago-revel-base-drawer-system sold separately.

Long System Specifications:

Long System - Measures 48-3/4" wide x 54" deep and is 11" tall. Weight is 72#

The Long Storage system is designed to mount to the top of the base drawer system found here https://www.goose-gear.com/products/winnebago-revel-base-drawer-system sold separately.

Both systems are sold as a complete set only and are not open for customization.

Select Black or Gray Drawer Face

This item requires truck freight shipping due to its size. shipping quotes will be provided. Shipping to a residential address can incur a lift gate fee of $125.00. We recommend shipping to a commercial location with a loading dock or forklift.

*Winnebago and Winnebago Revel are Trademarks of Winnebago

The Goose Gear Jeep JLU Ultimate Chef Package is a complete camping solution for those that like to cook and have everything they need close by and organized. By purchasing the combo kit you save $200.00 versus purchasing the items individually.

The package includes the Rear Plate System, the CampKitchen 2.3 as well as a Double Drawer.

Ultimate Chef Package for the Jeep JLU includes the following:

Jeep JLU Rear Plate System
Jeep JLU Without Sub

CampKitchen 2.3

Double Drawer Module
DD201925 for Non Subwoofer Jeeps

Select color as well as cubby access door location on drivers or passengers side.

Please refer to the notes on each product page for additional information.

The Goose Gear Toyota Tundra Second Row Seat Delete kits are currently only available for the Crew Max model with Factory Subwoofer, years 2007 - 2013. Crew Max without subwoofer and Double Cab rear seat delete will be available at a later date.

Crew Max Second Row Delete

The Second Row Seat Delete creates an incredible amount of flat storage space as well as storage below the seat delete. When both the 40% and the 60% are installed the overall width is just over 59" and the length is just over 43", just a bit less than the entire bed of a short bed Tacoma.

Crew Max 40% Delete is 43-1/4" long x 21-7/8" wide. Weight is 22#

Crew Max 60% Delete is 42-5/16" long x 37-3/4" wide. Weight is 31#

Double Cab Second Row Delete - Coming Soon

The Toyota Tundra Plate System is designed to be installed in the bed of your truck to provide a flat surface for mounting your own gear or our modules.

Currently only available for the Tundra Gen 2.5 2014-Present Short Bed 5.5' Models.

Plate requires drilling through the bed of the truck for proper securing. The plate is completely coated in bed liner material and is very durable. Designed to be installed in the bed of trucks with camper toppers, SnugTop, AT Habitat, GFC Camper, Vagabond and others. Not designed to be used in an open bed configuration.

This item must ship truck freight to a commercial address or picked up from the local freight forwarders hub due to size.

The Goose Gear Sequoia 3rd Row Delete Plate and Storage System provides a level and secure surface with abundant storage below the deck.

Featuring 4 lockable hatch doors using our compression latches, this plate is the first of its kind. This is due to the vehicle construction and layout. The plate sits approximately 8" above the base vehicle floor. With the 4 access hatches you can store your gear below and have plenty of room for additional storage on top. Additionally, you can utilize a wide selection of Goose Gear modules and install them onto the plate using the pre-installed anchor points.

Module depths up to 30" will still allow access to the forward access hatches. Perfect for our CampKitchen 2.1 or 2.2.

Our largest Toyota interior plate system to date and because of the additional storage below the plate you can take the option to add drawers or just use the massive space below the plate.

Requires the removal of the entire 3rd row seat. Mounts to vehicle using existing holes and anchor points. No drilling or cutting required.

Due to the limited use of this vehicle in our industry, we have only been able to test fit into a model year 2011 Sequoia with Platinum Trim Level. Please verify whether this plate will or will not fit your vehicle prior to purchase. Review the pictures we have provided to ensure this unit will work with your model year and trim level. As we gain access to additional models we will most certainly add the models that work.

This is our largest and most complex interior plate to date and due to its size we are required to ship this product via truck freight. Price listed includes crating and shipping.

The Goose Gear Tacoma System Base Plate is the first step in getting your Tacoma ready for adventure storage. The Base Plate is designed for use with the Tacoma Module system and is precision CNC machined and comes complete with pre-installed anchors for Tacoma Modules for an easy bolt in system that is secure and strong. The Base Plate is made from industrial grade 12mm Baltic birch and is 100% coated with professionally sprayed on bed liner material.

Choose from 5' Short Bed or 6' Long Bed

Designed for 2nd and 3rd Gen Tacoma's.

Tacoma module for use with the Tacoma System Plate.

DUE TO PRODUCT AVAILABILITY OF DRAWER SLIDES WE ARE EXPERIENCING DELAYS IN SHIPPING OF SOME MODELS OF TACOMA DRAWER SYSTEMS. PLEASE CONTACT US FOR AN UPDATE ON LEAD TIMES FOR TACOMA DRAWER SYSTEMS.

This single drawer module features a locking compression latch along with lock in and lock out drawer guides.

Choose from a single drawer module or a set. With a 19-3/16" wide module and a 23-5/16" wide module you have complete wheel to wheel storage. Or if you just need a single drawer order the model that fits your build needs. You can always add another module later if your setup needs change.

A full 4 or 5 foot drawer guide gives you 100% extension with complete access to your drawer on 50" modules and 82% extension on 59" modules and 88% drawer extension for near complete access to your drawer on 70" modules.

50" Modules are great for making space in the front of the drawer near the cab of the truck for water tanks, battery systems, tools and other gear and supplies that are not needed access to on a daily basis.

59" Modules are full length modules for short bed Tacoma's and leave approximately 12" clear to the cab in long bed Tacoma's.

70" Modules are full length modules for long bed Tacoma's.

Requires purchase of Goose Gear Tacoma System Plate and Tacoma Drawer Top Plate.

Module bolts directly to Goose Gear Tacoma System Plate. Some images shown reflect two modules, base plate and top plates. This listing is for a single drawer in the system.

Select your options:

1. Width of Module
2. Length of Module
3. Color

Designed for 2nd and 3rd Gen Tacoma's.

Price listed is for a single drawer module and requires a Tacoma System Plate and Tacoma Top Plate. Some images shown reflect a pair of modules with Tacoma Base Plate and Various Top Plate options.