Products

THE 5TH GEN WITH THE THIRD ROW SEAT MODEL 4RUNNERS. THE THIRD ROW DELETE MODEL IS ONLY AVAILABLE IN LOW PROFILE PLATE BASED MODELS.

40% AND 60% Sleeping Platforms are designed for 2010-Current Toyota 4Runner WITH THE 3rd Row Seat Delete Plate and are designed to remain flat and even with the rear plate. As shown in the pictures.

Overall length is 73", our taller clients push the front seats forward and stuff bags or pillows behind the seats to extend the sleeping area.

Includes fasteners and straps to secure sleeping platform to the back of an existing Goose Gear module and floor. Does not require drilling of the vehicle.

In the third row model 4Runner's, the 60% delete is on the Drivers Side and the 40% is on the Passengers side of the vehicle.

All sleeping platforms require the rear plate system for proper installation. As seen here 5th Gen 4Runner 3rd Row Delete Plate

 With the 4Runner STANDARD PROFILE sleeping platform you can now set up your rig for stealth camping and get comfortable. With the standard profile version you can leave the second row seat backs in place and simply fold them forward, but the seat bottoms must be removed for installation. The good news is that the lower seat section is held in with only two easy access bolts per side. If you remove the seat back as well, you will gain a great deal of additional storage as well as saving weight in your rig.

There are two models and three height options. The first is the Drivers side platform and covers the 40% side of the rear seat. The second is the passengers side platform and covers the 60% side of the rear seat. An access door from the top as well as side access when the passenger doors are open makes for an incredible amount of storage in the center of your vehicle and at the lowest point which is great for vehicle stability.

***The STANDARD PROFILE sleeping platforms for the 5th Gen 4Runner require the Goose Gear Plate and Goose Gear SUV drawer modules in 8", 10" or 12" heights to attach and are not included in this pricing. Does not require cutting or drilling of any part of the vehicle.***

Overall length is 76", our taller clients push the front seats forward and stuff bags or pillows behind the seats to extend the sleeping area.

40% and 60% Sleeping Platforms are designed for 2010-current Toyota 4Runner (without third row seat option only)

The 4Runner sleeping platforms require the rear 4Runner plate system and a drawer module in 8" - 10" or 12" height with the 8" and 10" being the most popular. Plate Systems can be found here 

Trail4r.com Installation Guide

The Goose Gear 4Runner Low Profile Sleeping System

With the 4Runner LOW PROFILE-PLATE BASED sleeping platform you can now set up your rig for stealth camping and get even more comfortable with more interior height. The first model is the Drivers side platform and covers the 40% side of the rear seat which must be completely removed for installation. The second model is the passengers side platform and covers the 60% side of the rear seat which must be completely removed for installation. An access door from the top as well as side access when the passenger door is open makes for a great amount of storage right in the center of your vehicle and at he lowest point which is great for vehicle stability.

***The LOW PROFILE sleeping platforms for the 5th Gen 4Runner do require the Goose Gear Plate but do not require a Goose Gear Storage Module. Does not require cutting or drilling of any part of the vehicle.***

Overall length is 73", our taller clients push the front seats forward and stuff bags or pillows behind the seats to extend the sleeping area.

40% and 60% Sleeping Platforms are designed for 2010-Current Toyota 4Runner (without third row seat option only)

The Goose Gear Alu-Box Top Plate Kit takes the lightweight and rugged Alu-Box aluminum storage boxes to the next level. It turns them into a solid step and gives them a solid top of sitting upon at camp. It also makes a great table when sitting around the campfire.

NEW DESIGN - Allows for proper stacking of Alu-Box's too.

Kit includes: top plate covered in Bullet Liner coating on all sides, stainless steel hardware for mounting

Installation requires drilling four holes into your Alu-Box to secure the top plate.

The Alu-Box is sold separately and not included with the kit.

AluCab Canopy Camper Drawers feature dovetailed Baltic Birch drawer boxes with full extension drawer guides. This unit fits both the 5' and the 6' Chevy Colorado's and will also fit on either side of the vehicle, Passengers and Drivers side.

AluCab Canopy Camper Drawers feature dovetailed Baltic Birch drawer boxes with full extension drawer guides. This unit fits both the 5' and the 6' Tacoma's and will also fit on either side of the vehicle, Passengers and Drivers side.

Module dimensions 25"w x 18.5"h x 13"d

Product images shown with TrekPak divider system and other camping items and are not included in drawer purchase.

AluCab Canopy Camper utility cabinet for the Chevy Colorado feature the same construction we are known for. AluCab Canopy Camper Utility Modules feature a lift off lid. These modules are the units that are designed to be installed in line with the Double Drawer Module between the Double Drawer Module and the cab of the truck. They are offered in Passenger and Driver Configurations for proper fitment.

AluCab Canopy Camper utility cabinet for the Tacoma feature the same construction we are known for. AluCab Canopy Camper Utility Modules feature a lift off lid. These modules are the units that are designed to be installed in line with the Double Drawer Module between the Double Drawer Module and the cab of the truck. They are offered in Passenger and Driver Configurations for proper fitment.

Module Dimensions
5' Bed 28.5"w x 18.5"h x 13"d
6' Bed 42"w x 18.5"h x 13"d

Goose Gear anchor packs are laser cut from 316 Stainless Steel for superior strength and corrosion resistance.

There are two designs, slotted and round. They are available as a kit of 4 anchors, slotted or round. They are also available as a kit with mounting hardware to secure them to the Goose Gear Module Extrusion using the convenient "roll-in" anchor. The roll in anchor can be rolled into the extrusion anywhere along the aluminum channel without having to remove any of the corner blocks.

Below is the slot design for 1" webbing and strapping materials.

Below is the round design which features a 9/16" diameter ring for caribeners, rope etc.

Both styles use 1/4-20 or 6mm bolts for securing.

Goose Gear Anchor Packs with mounting hardware for Goose Gear Modules.

AT Habitat Drawers feature the same construction we are known for with a couple additional features.

1. Habitat Drawer Modules feature aluminum drawer boxes for greater weight savings and more storage space.

2. Habitat Drawer Modules feature a lift off lid so you can access the top drawer from inside the Habitat during inclement weather.

Product images shown with TrekPak divider system and other camping items and are not included in drawer purchase.

AT Habitat Folding Bench Seats - Includes mounting hardware and rail. Two Seats Side x Side on One Rail.

Requires drilling and countersinking of screw holes into Habitat top rail.

Maximum weight per seat is 245#

The AT Habitat Sink/Storage Cabinet Comes in two designs. The first includes a built in sink that you can connect to your own water supply and water pump. The second design does not come with a sink and is built with storage shelves from top to bottom in both the left and right section.

In the Tacoma version, the lower section has a front panel that is the same height as the wheel wells with a removable shelf above. This is a great location for utility items such as water pumps and other items you do not need during a normal outing.

AT Habitat utility cabinet feature the same construction we are known.. Habitat Utility Modules feature a lift off lid. These modules are the units that are designed to be installed in line with the Double Drawer Module between the Double Drawer Module and the cab of the truck.

Product images shown with additional items not included such as battery systems and power management items.

This package is very similar to the system that we ran in our very own 4th Gen 4Runner. By utilizing a longer 36" drawer we gain storage that is easily accessible and leaves plenty of room on top for your personal gear. Things like sleeping bags, pillows and food. With the ability to store gear on top of the CampKitchen you can keep your entire pantry on top of the CampKitchen. By purchasing the combo kit you save $200.00 versus purchasing the items individually.

Image shown reflects a single drawer module and not the Double Drawer Module in this combo kit.

The package includes the Rear Plate System, the CampKitchen 2.2 as well as a Single drawer module that measures 22-3/16"w x 10"h x 36"d.

Brian's Favorite Package for the 5th Gen 4Runner without factory slide out tray.

PT4R-5-STD-BRIAN INCLUDES:

4Runner Rear Plate PT4R-5-STD
CampKitchen 2.2 CK192730
Single Drawer Module SD221036

Brian's Favorite Package for the 5th Gen 4Runner with factory slide out tray.

PT4R-5-SLIDE-BRIAN INCLUDES:

4Runner Rear Plate with Slide Out Tray PT4R-5-SLIDE
CampKitchen 2.2 CK192730
Single Drawer Module SD221036

Brian's Favorite Package for the 5th Gen 4Runner with factory 3rd row seat. 

PT4R-5-3RD-BRIAN INCLUDES:

4Runner 3rd Row Delete Plate PT4R-5-3RD
CampKitchen 2.2 CK192730
Single Drawer Module SD221036

Image shown has the 8" tall drawer, this system includes the 10" tall module at a 36" depth which matches closely to the height of the wheel wells.

The Goose Gear CampKitchen is designed to house your fridge and your stove in one convenient Module. Featuring a double slide operation, you can open the fridge and/or the stove slide independently or combined.

Version 2.1 is designed for ARB fridges up to 50qt, Engel up to 45qt, Indel B up to 40qt and SnoMaster up to 40qt. Version 2.1 does not fit into Jeep JKU's or FJ Cruiser.
Dimensions: 19-3/16' wide x 27 1/2" tall x 28" deep
CampKitchen 2.1 may also fit other refrigerators up to 15"w x 25"d x 20"h
CampKitchen 2.1 is 80 pounds

All CampKitchen modules will support the following stoves:
Cook Partner 9"
Cook Partner 16"
Cook Partner 18"
Cook Partner 22"
Will also fit other brand stoves up to 22"L x 4"H x 12"

Does not include stove or fridge.

The Goose Gear CampKitchen is designed to house your fridge and your stove in one convenient Module. Featuring a double slide operation, you can open the fridge and/or the stove slide independently or combined.

Version 2.2 is designed for all of the above fridges as well as the National Luna Weekender 50 and 52. Version 2.2 does not fit into Jeep JKU's of FJ Cruiser.
Dimensions: 19-3/16' wide x 27 1/2" tall x 30" deep
CampKitchen 2.2 may also fit other refrigerators up to 15"w x 25"d x 20"h
CampKitchen 2.2 is 83 pounds
 
All CampKitchen modules will support the following stoves:
Cook Partner 9"
Cook Partner 16"
Cook Partner 18"
Cook Partner 22"
Will also fit other brand stoves up to 22"L x 4"H x 12"

Does not include stove or fridge.

The Goose Gear CampKitchen is designed to house your fridge and your stove in one convenient Module. Featuring a double slide operation, you can open the fridge and/or the stove slide independently or combined.

Version 2.3 is designed for Jeep JKU's, JLU's and FJ Cruisers. This model supports the following fridges ARB fridges up to 50qt, Engel up to 45qt, Indel B up to 40qt, Dometic 40 the JKU and will fit the JLU with removal of one handle and installation of our slotted anchors to reduce the overall length of the fridge to clear the rear seat.
Dimensions: 19-3/16' wide x 27 1/2" tall x 25-28" deep
CampKitchen 2.3 may also fit other refrigerators up to 15"w x 25"d x 20"h
CampKitchen 2.3 is 79 pounds

  All CampKitchen modules will support the following stoves:
Cook Partner 9"
Cook Partner 16"
Cook Partner 18"
Cook Partner 22"
Will also fit other brand stoves up to 22"L x 4"H x 12"

Does not include stove or fridge.

Image of Dometic 40 in JLU with the use of our slotted anchors and removal of one handle at second row seat back.

The Goose Gear CampKitchen is designed to house your fridge and your stove in one convenient Module. Featuring a double slide operation, you can open the fridge and/or the stove slide independently or combined.

Version 2.4 is designed for all of the above fridges listed in Version 2.1 and 2.2 but is also larger to accommodate the following fridges as well. At this time, this module is only tested to fit into 5th Gen 4Runners and all Land Cruisers from 60-200 series.
Dimensions: 22-3/16" wide x 29" tall x 31-1/2" deep
CampKitchen 2.4 may also fit other refrigerators up to 18"w x 29-1/2"d x 22"h CampKitchen 2.4 is 89 pounds

Below is a list of the more popular fridges that will fit into the CampKitchen 2.4.
National Luna
Weekender 40
Weekender 55
Weekender 60
Indel B
TB50
Dometic
CFX 50
CFX 65W
CFX 65 DZ
SnoMaster
TR42S
CL56D
CL60
 
All CampKitchen modules will support the following stoves:
Cook Partner 9"
Cook Partner 16"
Cook Partner 18"
Cook Partner 22"
Will also fit other brand stoves up to 22"L x 4"H x 12"

Does not include stove or fridge.

The CampKitchen Utensils Box provides a great space next to your Cook Partner Stove for organizing and storing your utensils, spices, plates etc.

It comes in four sizes, Small for 22" Cook Partner Stoves, Medium for 18" Cook Partner Stoves and Large for 9" Cook Partner Stoves. The Extra Large version is designed to completely fill the stove tray and does not leave room for a stove.

The Small size is designed to fit next to a Cook Partner 22" Double Burner stove and measures 3-1/4"w x 14-1/2"d x 3-3/8"h

The Medium Size is designed to fit next to a Cook Partner 18" Double Burner stove and measures 7"w x 14-1/2"d x 3-3/8"h

The Large Size is designed to fit next to a Cook Partner 9" Single Burner stove and measures 16"w x 14-1/2"d x 3-3/8"h

The Extra Large Size is designed to completely fill the stove tray and does not leave room for a stove, measures 25-5/8"w x 14-1/2"d x 3-3/8"h

The Colorado Second Gen Rear Seat Deletes are designed to be 100% bolt in and all you to remove the second row seats as needed.

They are offered in 60% Drivers and 40% Passengers Seat options. You can do one or the other or even both rear seat deletes for a 100% platform. Both the 40 and the 60 feature two doors for access to the storage below the plate.

The Goose Gear cutting board is made from 1/4" thick 3 ply Bamboo. It measures 15" wide x 11" long and has a hole cut into it for hanging it out dry while out on the trail.

All cutting boards are shipped sanded and prepped for Cutting Board Oil, which you can get at most home improvement or home goods stores.

This module is designed exclusively for the Jeep TJ 

Our Double Drawer Module features 11-ply Baltic Birch dovetail finished drawer boxes. They are mounted to 350# rated full-extension drawer guides for smooth operation and durable performance. The drawers are secured with a locking compression latch. We build all of our drawer modules to last, but at the least weight possible. 

Since the factory subwoofer protrudes into the vehicle space quite a bit we reduced the width of the modules. The 15-3/16" single and double drawer modules pair with the Campkitchen 2.1 and 2.3 or the Standard Icebox in 25" and 28" depth, both of which are 19-3/16" in width to be installed on the other side. This 15-3/16" width drawer module also pairs with the single and double drawer modules in 19-3/16" width.

The 15 3/16" wide version comes in the following configurations:

-- 25" Deep Drawers ---

• 15 3/16""W x 15"H x 25"D
• 15 3/16""W x 19"H x 25"D
• 15 3/16""W x 22"H x 25"D

This module is Goose Gear Plate System compatible.

This module is designed exclusively for the Jeep TJ 

Our Double Drawer Module features 11-ply Baltic Birch dovetail finished drawer boxes. They are mounted to 350# rated full-extension drawer guides for smooth operation and durable performance. The drawers are secured with a locking compression latch. We build all of our drawer modules to last, but at the least weight possible. 

Since the factory subwoofer protrudes into the vehicle space quite a bit we reduced the width of the modules. The 15-3/16" single and double drawer modules pair with the Campkitchen 2.1 and 2.3 or the Standard Icebox in 25" and 28" depth, both of which are 19-3/16" in width to be installed on the other side. This 15-3/16" width drawer module also pairs with the single and double drawer modules in 19-3/16" width.

The 15 3/16" wide version comes in the following configurations:

-- 28" Deep Drawers ---

• 15 3/16""W x 15"H x 28"D
• 15 3/16""W x 19"H x 28"D
• 15 3/16""W x 22"H x 28"D

This module is Goose Gear Plate System compatible.

This module is designed exclusively for the Jeep JLU with Subwoofer models, 2018 - Current

Our Double Drawer Module features 11-ply Baltic Birch dovetail finished drawer boxes. They are mounted to 350# rated full-extension drawer guides for smooth operation and durable performance. The drawers are secured with a locking compression latch. We build all of our drawer modules to last, but at the least weight possible. 

Since the factory subwoofer protrudes into the vehicle space quite a bit we reduced the width of the modules. The 18-3/16" single and double drawer modules pair with the Campkitchen 2.3 or the Standard Icebox in 25" depth, both of which are 19-3/16" in width to be installed on the other side. This 18-3/16" width drawer module also pairs with the single and double drawer modules in 19-3/16" width.

The 18 3/16" wide version comes in the following configurations:

-- 25" Deep Drawers ---

• 18 3/16""W x 15"H x 25"D
• 18 3/16""W x 19"H x 25"D
• 18 3/16""W x 22"H x 25"D

This module is Goose Gear Plate System compatible.

Our Double Drawer Module features 11-ply Baltic Birch dovetail finished drawer boxes. They are mounted to 350# rated full-extension drawer guides for smooth operation and durable performance. The drawers are secured with a locking compression latch. We build all of our drawer modules to last, but at the least weight possible. 

The 19 3/16" wide x 25" deep version comes in the following height configurations:

-- 25" Deep Drawers ---

• 19 3/16""W x 15"H x 25"D
• 19 3/16""W x 19"H x 25"D
• 19 3/16""W x 22"H x 25"D

This module is Goose Gear Plate System compatible.

Our Double Drawer Module features 11-ply Baltic Birch dovetail finished drawer boxes. They are mounted to 350# rated full-extension drawer guides for smooth operation and durable performance. The drawers are secured with a locking compression latch. We build all of our drawer modules to last, but at the least weight possible. 

The 19 3/16" wide x 28" deep version comes in the following height configurations:

-- 28" Deep Drawers ---

• 19 3/16""W x 15"H x 28"D
• 19 3/16""W x 19"H x 28"D
• 19 3/16""W x 22"H x 28"D

This module is Goose Gear Plate System compatible.

Our Double Drawer Module features 11-ply Baltic Birch dovetail finished drawer boxes. They are mounted to 350# rated full-extension drawer guides for smooth operation and durable performance. The drawers are secured with a locking compression latch. We build all of our drawer modules to last, but at the least weight possible. 

The 19 3/16" wide x 30" deep version comes in the following height configurations:

-- 30" Deep Drawers ---

• 19 3/16""W x 15"H x 30"D
• 19 3/16""W x 19"H x 30"D
• 19 3/16""W x 22"H x 30"D

This module is Goose Gear Plate System compatible.

This module is designed exclusively for the Jeep JLU Non-Subwoofer models, 2018 - Current

Our Double Drawer Module features 11-ply Baltic Birch dovetail finished drawer boxes. They are mounted to 350# rated full-extension drawer guides for smooth operation and durable performance. The drawers are secured with a locking compression latch. We build all of our drawer modules to last, but at the least weight possible. 

The 20-3/16" single and double drawer modules pair with the Campkitchen 2.3 or the Standard Icebox in 25" depth, both of which are 19-3/16" width to be installed on the other side. This 20-3/16" width drawer module also pairs with the single and double drawer modules in 19-3/16" width.

The 20 3/16" wide x 25" deep version comes in the following height configurations:

-- 25" Deep Drawers ---

• 20 3/16""W x 15"H x 25"D
• 20 3/16""W x 19"H x 25"D
• 20 3/16""W x 22"H x 25"D

This module is Goose Gear Plate System compatible.

This module is designed exclusively for the Jeep JL 2 door models, 2018 - Current

Our Double Drawer Module features 11-ply Baltic Birch dovetail finished drawer boxes. They are mounted to 350# rated full-extension drawer guides for smooth operation and durable performance. The drawers are secured with a locking compression latch. We build all of our drawer modules to last, but at the least weight possible. 

The 20-3/16" single and double drawer modules pair with the Campkitchen 2.1 or the Standard Icebox in 28" depth, both of which are 19-3/16" width to be installed on the other side. This 20-3/16" width drawer module also pairs with the single and double drawer modules in 19-3/16" width.

The 20 3/16" wide x 28" deep version comes in the following height configurations:

-- 28" Deep Drawers ---

• 20 3/16""W x 15"H x 28"D
• 20 3/16""W x 19"H x 28"D
• 20 3/16""W x 22"H x 28"D

This module is Goose Gear Plate System compatible.

Our Double Drawer Module features 11-ply Baltic Birch dovetail finished drawer boxes. They are mounted to 350# rated full-extension drawer guides for smooth operation and durable performance. The drawers are secured with a locking compression latch. We build all of our drawer modules to last, but at the least weight possible. 

The 22 3/16" wide x 25" deep version comes in the following height configurations:

-- 25" Deep Drawers ---

• 22 3/16""W x 15"H x 25"D
• 22 3/16""W x 19"H x 25"D
• 22 3/16""W x 22"H x 25"D

This module is Goose Gear Plate System compatible.

Our Double Drawer Module features 11-ply Baltic Birch dovetail finished drawer boxes. They are mounted to 350# rated full-extension drawer guides for smooth operation and durable performance. The drawers are secured with a locking compression latch. We build all of our drawer modules to last, but at the least weight possible. 

The 22 3/16" wide x 28" deep version comes in the following height configurations:

-- 28" Deep Drawers ---

• 22 3/16""W x 15"H x 28"D
• 22 3/16""W x 19"H x 28"D
• 22 3/16""W x 22"H x 28"D

This module is Goose Gear Plate System compatible.