AT has designed an aluminum bracket for the Manchester Tank 10 lb propane cylinder.
The brackets are made from 1/8" thick aluminum and have rubber bump stops to hold the cylinder off the bracket. The cylinder is held in place by two stainless steel T Bolt clamps. There are pre-drilled holes in the bracket.
BRACKET: Size: 12.375" T x 9.5" W x 4.75" D (314mm x 241mm x 120mm) Weight:2.5 Lbs (1.13 Kg.) 1/8" Thick aluminum Two Stainless Steel constant tension clamps
The bracket and cylinder combined weight is 17 lbs.(7.7 Kg) and it is 18" tall (457mm) with a maximum diameter of 10.3"(226mm).
CYLINDER: The Manchester 10 lb propane cylinder that fits into this bracket is 17.4" tall x 8.9" in (442mm x 226mm) diameter and holds 2.4 gallons of propane.
5 lb. Propane Cylinder Bracket
5 lb. Propane Cylinder Bracket. AT's aluminum propane bracket, sized to fit a 5 lb. propane tank. Compact and light weight.
(DOT 5 lb cylinder 12" H x 8" diameter).
AT Can Holder (NATO style)
AT uses 0.125” thick, The redesigned holder is clear coated and made from plates that are riveted together, they have an industrial look to them. These strong and functional each unit weighs 6 lbs.
The holder has built in attachment points so it can be mounted in any variety of positions, apart from upside down.
Uses the CARB 2 strap.
Holder dimensions: 19.875" x 14.75" x 7.375" (505mm x 375mm x 187mm)
One strap is included when ordering a can holder.
AT Can Holder (Scepter style)
The AT Scepter Can Holder is madefrom0.125” thick aluminum. The holder is clear coated and made from plates that are riveted together. These industrial grade holders are strong and functional. The holder has built in attachment points so it can be mounted in any variety of positions, apart from upside down.
The strap for the Scepter Can works with the water can (MWC) with the small breather cap on the main fill cap and the fuel can (MFC).
Holder dimensions: 19.875" x 14.75" x 7.375" (505mm x 375mm x 187mm)
AT Can Holder - metal straps
AT uses 0.125” thick, clear anodized aluminum straps for their holders.
The straps are unique to three different styles of cans, please specify when ordering:
Strap 2: To be used with CARB 2 fuel cans (the spout fits inside the fuel can), all NATO cans, and Scepter Military Gasoline and Diesel cans.
Strap 3: To be used with Scepter Military Water Cans
One strap is included when ordering a can holder. Only order extra straps for you cn holder on this page.
AT Combo Slide
The lower slide is built to hold the JK Partner Steel Stove, and the upper slide to hold an Engel 45, a National Luna Weekender Fridge, or a ARB 50 qt . For easy of fitting a mounting plate is used to secure the fridge to the slide, it can also be bolted directly to it.
A Partner Steel Stove has been made specifically to fit the combo slide and has the controls built into the end of the unit.
This is a two level fridge slide. The Upper slide for a fridge, the lower slide for a partner steel stove (not included). The slides are rated at 500 lb rated and lock in and out. If a stove is not fitted to the lower slide it can be used as a storage shelf.
The Combo Slide is: 29"(737mm) long without the stove 16"(406mm) wide and 5"(127mm) tall.
The AT Overland Bamboo Cutting Board for the Tembo Tusk Skottle is the perfect food prep companion. Measuring 14” x 19” x ¾” thick, it is up to any culinary tasks you can throw at it and yet it fits conveniently inside your Skottle carrying bag with the rest of your Skottle parts.
Bamboo cutting boards are harder and less porous than hardwoods. Bamboo absorbs very little moisture and resists scarring from knives, so they are more resistant to bacteria than other woods.
Clean bamboo cutting boards with hot soapy water; sanitize if desired. Rub with mineral oil to help retain moisture and preserve.
Dimensions: 14” x 19” x ¾” Weight: 4 lbs
AT Overland Rotopax Holder for GEN 2 Rotopax
The AT Overland Rotopax Holder is designed specifically for the Gen-2, 2 Gallon Rotopax container and fits Four Wheel Campers or any camper using the 13” Rieco Titan HD Corner Bracket system. The holder fits on the rear bracket of a slide-in or flatbed camper, and on the front bracket of any camper, including the Project M provided that there is 4” of space between the cab and camper. The holder includes all necessary mounting hardware and a padlock with 3 keys. If you order more than one holder, padlocks will be keyed alike.
Dimensions: 3.625” thick x 18.375” high x 16.625” wide
Includes: - Rotopax holder - All necessary mounting hardware - Padlock with (3) keys
Weight: - 8 lbs. solo - 12 lbs. with Rotopax empty - 24 lbs. filled with gasoline - 28 lbs. filled with water
Rotopax shown are not included, but can be added to your order.
Four Wheel Camper Fuel Can Corner Bracket
Use the AT Corner Bracket if you want to mount a fuel or water can to the back of your Four Wheel Camper.
Order the Corner Bracket, Fuel Can Holder, and Water Can or Fuel Can at the same time and get the complete set up.
Some assembly is required, you will have to drill three mounting holes in the Fuel Can Holder so you can mount the bracket to the Fuel Can Holder. You will also have to drill holes in the aluminum support plate and into the overhang on the camper. If you have fold down rear steps or underbody lighting you may have to notch the holder or plate to accommodate a correct fitment.
Starting in 2018 Four Wheel Campers moved the corner brackets used to attach the camper jacks up one inch above the outside corners to make room for the edge trim. Please let us know in the notes section if your camper has the raised corner brackets. Please also let us know which side, passenger or driver's side the holder is to be mounted, and which model of camper the bracket will be fitted to.
Includes all mounting hardware, does not include can holder or can.
This kit includes the External Corner Mount Bracket that mounts to the Jeep Wrangler JK/JKU hard top, the 5 lb. propane bracket, and the propane cylinder. Mounting requires drilling into the hard top and inserting well plugs, which are provided.
Jeep JK, External Corner Mount, for Propane Bracket.
This External Corner Mount Bracket mounts to the drivers side rear corner of the Jeep Wrangler JK/JKU hard top. Mounting requires drilling into the hard top and inserting well plugs, which are provided. This bracket is used in conjunction with our 5 lb. propane bracket and our 5 lb. propane cylinder.
You can also buy the complete kit that includes all three items here.
JK Composite Storage (Stage 1)
Stage 1: Composite drawer for JK Unlimited LineX coated. 22" W x 12.25" H x 30" L, contoured to fit with rear seats in place. The drawers are pre-assembled with a removable top to help with installation.
Later model JK's with the sub woofer set in the floor of the rear compartment will need the grill on the speaker removed so the drawer can be fitted on top of it.
Allow 6 weeks from order to shipping
JK Composite Storage (Stage 2)
Composite twin top loading compartment for JK Unlimited, LineX coated with false bottom for access to passenger foot well, allows access to flex water tank if fitted.
Dimensions: (22"W x 30L" x 19" H).
Accessory compartment (7" W x 25"L x 10.5" H).
Optional Flip up extension to allow for in cab sleeping ( 10" x 22" W).
Mechanicals panel below accessory compartment for pump switch, shower mixer, valves. (works with Stage 1 drawer. Requires removal of 60% rear seat)