Fridges and Slides

TemboTusk Standard Front Pull Fridge Slide

$465.00

Our Extreme Duty Flat Slides, like its big brother, the LoadSpotter, only uses top of the line, Accuride locking slide tracks. These are the toughest, most rugged refrigerator/cargo slides made. And, they are made in the USA.

Outside dimensions: 18.75" wide x 28" deep (Foot print of slide)

Inside pan size: 17" wide x 28" deep (Area where the fridge or cargo will fit.)

The fridge pan will place the fridge or cargo 1" above the bolt down deck.

See FAQs for additional fridge and slide clearances.

Cutting Board is optional, 12 x 18 inches. Fridge will sit 2.5 inches above the bolt down deck.

Don't forget the Buffalo Straps!

TemboTusk Standard Front Pull Fridge Slide

TemboTusk Standard Side Pull Slide

$465.00

Our Extreme Duty Flat Slides, like its big brother, the LoadSpotter, only uses top of the line, Accuride locking slide tracks. These are the toughest, most rugged refrigerator/cargo slides made. And, they are made in the USA.

Outside Dimensions: 29.75" wide x 18" deep (Foot print of slide)

Inside Pan Size: 28" wide x 17" deep (Area where the fridge or cargo will fit.)

The fridge pan will place the fridge or cargo 1" above the bolt down deck.

See FAQs for additional fridge and slide clearances.

Cutting Board is optional, Cutting board can deploy from either right or left side depending on setup. Cutting board is 12" x 18". Fridge will sit 2.5 inches above the bolt down deck with this option.

Don't forget the Buffalo Fridge Straps.

TemboTusk Mid-size Front Pull Fridge Slide (18" x 30")

$475.00

Perfect for the:

National Luna 55 ltr and 60 ltr Twin fridges
SnoMaster 40-60ltr+ fridges
Dometic CFX-50US

Our Extreme Duty Flat Slides, like its big brother, the LoadSpotter, only uses top of the line, Accuride locking slide tracks. These are the toughest, most rugged refrigerator/cargo slides made. And, they are made in the USA.

Outside dimensions: 21.25" wide x 31" deep (Foot print of slide)

Inside pan size: 18.25" wide x 30" deep (Area where the fridge or cargo will fit.)

The fridge pan will place the fridge or cargo 1" above the bolt down deck.

See FAQs for additional fridge and slide clearances.

Cutting Board is optional, 12 x 18 inches. Fridge will sit 2.5" above the bolt down deck. .

Don't forget the Buffalo Straps!

TemboTusk Mid-size Front Pull Fridge Slide (18" x 30")

TemboTusk Mid-Size Side Pull Fridge Slider (30" x 18")

$475.00

Perfect for the:

National Luna 55 ltr and 60 ltr Twin fridges
SnoMaster 40-60ltr+ fridges
Dometic CFX-50US

Our Extreme Duty Flat Slides, like its big brother, the LoadSpotter, only uses top of the line, Accuride locking slide tracks. These are the toughest, most rugged refrigerator/cargo slides made. And, they are made in the USA.

Outside dimensions: 32" wide x 18.75" deep (Foot print of slide)

Inside pan size: 30" wide x 18.25" deep (Area where the fridge or cargo will fit.)

The fridge pan will place the fridge or cargo 1" above the bolt down deck.

See FAQs for additional fridge and slide clearances.

Cutting Board is optional, 12 x 18 inches. Fridge will sit 2.5 inches above the bolt down deck.

Don't forget the Buffalo Straps!

TemboTusk Mid-Size Side Pull Fridge Slider (30" x 18")

TemboTusk Jumbo Front Pull Slide

$495.00

Our Extreme Duty Jumbo Flat Slides, like its big brother, the LoadSpotter, only uses top of the line, Accuride locking slide tracks. These are the toughest, most rugged refrigerator/cargo slides made. And, they are made in the USA.

Outside dimensions: 21.75" wide x 34" deep (Foot print of slide)

Inside pan size: 20" wide x34" deep (Area where the fridge or cargo will fit.)

The fridge pan will put the fridge 1" above the bolt down location.

See FAQs for additional fridge and slide clearances.

Cutting Board is optional, 12 x 18 inches. Fridge will sit 2.5 inches above the bolt down location.

The Jumbo slides will accommodate fridges 60 to 110 liters

Don't forget to order Buffalo Straps to hold down the fridge to the slide.

TemboTusk Jumbo Side Pull Slide

$495.00

Our Extreme Duty Jumbo Side Pull Flat Slides, like its big brother, the LoadSpotter, only uses top of the line, Accuride locking slide tracks. These are the toughest, most rugged refrigerator/cargo slides made. And, they are made in the USA.

Outside dimensions: 35.75" wide x 20" deep (Foot print of slide)

Inside pan size: 34" wide x 20" deep (Area where the fridge or cargo will fit.)

The fridge pan will place the fridge or cargo 1" above the bolt down deck.

See FAQs for additional fridge and slide clearances.

Cutting Board is optional, Cutting board can deploy from either right or left side depending on setup. Cutting board is 12" x 18". Fridge will sit 2.5" above the bolt down deck with this option.

The Jumbo slides will accommodate fridges 60 to 110 liters.

Don't forget to order the Buffalo Straps to hold down the fridge to the slide.

TemboTusk Cutting Board Assembly

$275.00

The cutting board attachment for the Extreme Duty Flat Slides is an absolute must. The cutting board will fit all of our slides.

The extended cutting board can be used to help load or unload the fridge, used for meal prep or even as a dinner table or computer station.

The Cutting Board Attachment comes in 12x18 inch white plastic cutting board material.

All TemboTusk slides come pre-drilled for the Cutting Board Attachment. A simple bolt in attachment. The cutting board attachment will raise the fridge pan 1.5 inches.

TemboTusk Buffalo Straps

$59.00

The Tembo Buffalo Straps are an extreme duty off-road refrigerator, cooler and cargo tie-down system.

The Tembo Buffalo Straps are made of heavy duty one inch polyester webbing, attached to a metal cam buckle and are constructed with built-in loops designed to attach to almost any anchor system or roll bar.

No more hunting for a lost strap, it is always attached, but easily removed.

The Tembo Buffalo Straps have a tie down reach of approximately 39 inches.

The tie down system comes with four straps, and is packaged in a heavy duty reusable storage container.

Click here: How to install a set of Buffalo Straps

TemboTusk Docking Station (Standing and Mid-Size Front Pull Slides)

$95.00

The Docking Station is an option for those who do not want to leave their Standard or Mid-Size Front Pull Flat Slide in their vehicle all the time.

The Docking Station is permanently installed and allows the Flat Slide to be easily removed or reinstalled without having to deal with hard to reach bolts.

Have two vehicles? Put a Docking Station in each vehicle for ease of swapping your slide from truck to truck.

The Docking Station has a quarter inch profile which will not interfere with the normal usage of your cargo area when the slide is removed

Docking Station comes with bolts for attaching to the slide.

(For Standard & Mid-Size Front Pull Slides only)

TemboTusk Docking Station (Standing and Mid-Size Front Pull Slides)

TemboTusk Docking Station (Jumbo Front Pull Slide)

$95.00

The Docking Station is an option for those who do not want to leave their Jumbo Front Pull Flat Slide in their vehicle all the time.

The Docking Station is permanently installed and allows the Flat Slide to be easily removed or reinstalled without having to deal with hard to reach bolts.

Have two vehicles? Put a Docking Station in each vehicle for ease of swapping your slide from truck to truck.

The Docking Station has a quarter inch profile which will not interfere with the normal usage of your cargo area when the slide is removed

Docking Station comes with bolts for attaching to the slide.

(For JUMBO Front Pull Slides only)