THE 5TH GEN WITH THE THIRD ROW SEAT MODEL 4RUNNERS. THE THIRD ROW DELETE MODEL IS ONLY AVAILABLE IN LOW PROFILE PLATE BASED MODELS.

40% AND 60% Sleeping Platforms are designed for 2010-Current Toyota 4Runner WITH THE 3rd Row Seat Delete Plate and are designed to remain flat and even with the rear plate. As shown in the pictures.

Overall length is 73", our taller clients push the front seats forward and stuff bags or pillows behind the seats to extend the sleeping area.

Includes fasteners and straps to secure sleeping platform to the back of an existing Goose Gear module and floor. Does not require drilling of the vehicle.

In the third row model 4Runner's, the 60% delete is on the Drivers Side and the 40% is on the Passengers side of the vehicle.

All sleeping platforms require the rear plate system for proper installation. As seen here 5th Gen 4Runner 3rd Row Delete Plate

 With the 4Runner STANDARD PROFILE sleeping platform you can now set up your rig for stealth camping and get comfortable. With the standard profile version you can leave the second row seat backs in place and simply fold them forward, but the seat bottoms must be removed for installation. The good news is that the lower seat section is held in with only two easy access bolts per side. If you remove the seat back as well, you will gain a great deal of additional storage as well as saving weight in your rig.

There are two models and three height options. The first is the Drivers side platform and covers the 40% side of the rear seat. The second is the passengers side platform and covers the 60% side of the rear seat. An access door from the top as well as side access when the passenger doors are open makes for an incredible amount of storage in the center of your vehicle and at the lowest point which is great for vehicle stability.

***The STANDARD PROFILE sleeping platforms for the 5th Gen 4Runner require the Goose Gear Plate and Goose Gear SUV drawer modules in 8", 10" or 12" heights to attach and are not included in this pricing. Does not require cutting or drilling of any part of the vehicle.***

Overall length is 76", our taller clients push the front seats forward and stuff bags or pillows behind the seats to extend the sleeping area.

40% and 60% Sleeping Platforms are designed for 2010-current Toyota 4Runner (without third row seat option only)

The 4Runner sleeping platforms require the rear 4Runner plate system and a drawer module in 8" - 10" or 12" height with the 8" and 10" being the most popular. Plate Systems can be found here 

Trail4r.com Installation Guide

The Goose Gear 4Runner Low Profile Sleeping System

With the 4Runner LOW PROFILE-PLATE BASED sleeping platform you can now set up your rig for stealth camping and get even more comfortable with more interior height. The first model is the Drivers side platform and covers the 40% side of the rear seat which must be completely removed for installation. The second model is the passengers side platform and covers the 60% side of the rear seat which must be completely removed for installation. An access door from the top as well as side access when the passenger door is open makes for a great amount of storage right in the center of your vehicle and at he lowest point which is great for vehicle stability.

***The LOW PROFILE sleeping platforms for the 5th Gen 4Runner do require the Goose Gear Plate but do not require a Goose Gear Storage Module. Does not require cutting or drilling of any part of the vehicle.***

Overall length is 73", our taller clients push the front seats forward and stuff bags or pillows behind the seats to extend the sleeping area.

40% and 60% Sleeping Platforms are designed for 2010-Current Toyota 4Runner (without third row seat option only)

This package is very similar to the system that we ran in our very own 4th Gen 4Runner. By utilizing a longer 36" drawer we gain storage that is easily accessible and leaves plenty of room on top for your personal gear. Things like sleeping bags, pillows and food. With the ability to store gear on top of the CampKitchen you can keep your entire pantry on top of the CampKitchen. By purchasing the combo kit you save $200.00 versus purchasing the items individually.

Image shown reflects a single drawer module and not the Double Drawer Module in this combo kit.

The package includes the Rear Plate System, the CampKitchen 2.2 as well as a Single drawer module that measures 22-3/16"w x 10"h x 36"d.

Brian's Favorite Package for the 5th Gen 4Runner without factory slide out tray.

PT4R-5-STD-BRIAN INCLUDES:

4Runner Rear Plate PT4R-5-STD
CampKitchen 2.2 CK192730
Single Drawer Module SD221036

Brian's Favorite Package for the 5th Gen 4Runner with factory slide out tray.

PT4R-5-SLIDE-BRIAN INCLUDES:

4Runner Rear Plate with Slide Out Tray PT4R-5-SLIDE
CampKitchen 2.2 CK192730
Single Drawer Module SD221036

Brian's Favorite Package for the 5th Gen 4Runner with factory 3rd row seat. 

PT4R-5-3RD-BRIAN INCLUDES:

4Runner 3rd Row Delete Plate PT4R-5-3RD
CampKitchen 2.2 CK192730
Single Drawer Module SD221036

Image shown has the 8" tall drawer, this system includes the 10" tall module at a 36" depth which matches closely to the height of the wheel wells.

The Colorado Second Gen Rear Seat Deletes are designed to be 100% bolt in and all you to remove the second row seats as needed.

They are offered in 60% Drivers and 40% Passengers Seat options. You can do one or the other or even both rear seat deletes for a 100% platform. Both the 40 and the 60 feature two doors for access to the storage below the plate.

The new Goose Gear FJ Cruiser plate is in its second generation and is now designed to work with the FJ Cruiser Second Row Seat Delete Plates.

The original FJ Cruiser Plate has a different design and will not work with the new second row seat deletes. We have always taken extreme efforts to future proof our systems but on the FJ we did not execute as well as we would've liked. If you have a gen 1 unit and plan on updating to a second row seat delete contact us and we will offer you special pricing for the updated unit.

With the FJ Cruiser plate system you can now easily install and remove Goose Gear Modules with simple hand tools. This system requires the removal of the rear factory slide and carpet kit. Does not require cutting or drilling of any part of the vehicle. Once the plate is installed you now have a clean and flat surface perfect for mounting Goose Gear Modules or your own storage system and accessories. Extremely light weight for its strength, the weight of the plate is less than 39 pounds.

Due to the length of the FJ Cruiser, double drawer modules in 25" depth and side x side modules at 28" depth are the deepest that will fit onto the rear plate system.

If you install a tall cabinet, such as a double drawer cabinet at 22" height, IceBox or CampKitchen on the passenger side it must be installed into the inboard hole pattern which will only leave 19-3/16" available space next to that item. See the image below for more information and feel free to call for more details. Notice that our customer utilized the 3" space to the right of the CampKitchen to store his folding table. The double drawer to the left is a 19-3/16" wide version.

Fits '07 - '14 Toyota FJ Cruiser models

Includes fasteners to secure plate system to vehicle using existing threaded inserts within vehicle body.

If you are planning to use a CampKitchen or an IceBox you will need to buy the following models.

CampKitchen 2.3

IceBox 1.3

IceBox with Top Drawer 1.3

All of the above listed units will only work with the Engel 45 or the Snomaster 42 in the FJ Cruiser due to the short distance between the rear seat and the tailgate.

The Goose Gear Jeep JK 2 Door Plate System is now available for 2007-2017 models.

The Jeep Plate System features a Bullet Liner covered Baltic Birch plywood. This plate allows the user to easily install various Jeep Specific modules including single and double drawer systems as well as the ever famous Icebox module and the new CampKitchen 2.3 for Jeeps. The plate system also makes a great platform for securing your own storage or gear including dog crates, other fridge slide brands, etc. Due to the extra depth of the 2 door plate you can use the deeper modules such as the 36" deep Single Drawer Modules and the 28" deep Double Drawer Modules. You can also use the standard IceBox and CampKitchen units including the CampKitchen 2.2 for the National Luna Weekender 50/52.

There are two versions

1. The Subwoofer compatible version is only for 2015 and newer Jeeps with the subwoofer located in the floor of the Jeep. The subwoofer compatible version does not work with door side mounted subwoofers typically found in 2010-2014 model year Jeeps.

2. The access door version is designed for all JK model years that do not have the subwoofer located in the floor storage tub in the rear of the Jeep.

Installation requires the permanent removal of the plastic trim in the rear cargo area. For 2007-2010 Jeeps there is typically carpet around the wheel well area. In later model Jeeps 2011+ the carpet is not there and once the plastic trim is removed the exposed painted metal of the Jeep body will be visible.

Please note: The Goose Gear plate system for the 2007-2010 Jeep JK requires drilling and installation of threaded inserts into the vehicle floor. Due to the shear lack of anchor points in this year range we had to resort to having our customers drill into their rigs for the plate system to work properly. The plate system will ship with the threaded inserts as well as the tool to install them.

Installation of the plate requires the removal or the trimming of the quarter panel plastics. If you have a door side mounted subwoofer it will have to be relocated or removed for the plate system to fit into your vehicle, this option is typically found in 2010-2014 model years.

Jeep images with the red exterior are shown with the optional Jeep JK 2 Door Cubbies

Product weight is only 42.5 pounds.

Goose Gear Jeep JKU Side Cubbies for 2007-2018 Jeep 2 door models.

The Jeep Plate System side cubbies feature a Bullet Line covered Baltic Birch plywood with storage cubbies in front of both roll bar locations in the rear cargo area. The cubbies serve as a great way to square up the rear cargo area and create additional lockable storage compartments. They are designed to work with the Goose Gear JK Plate.

There are two options for the roll bar surrounds. The first is a roll bar surround that requires the removal of the second row seat belts. The second is a roll bar surround that allows the second row seat belt hardware to remain attached to the factory roll bar.

On 2007-2010 models the rear door does not have a hinge like found on the later models. The hinge cutout is precut into the cubbies and on early model 2007-2010 models you will see the vehicle body through the precut hole.

The Goose Gear plate system for the Jeep JK is a direct bolt in unit and requires no drilling into your vehicle.

Jeep images shown with the red exterior show the Jeep JK Floor Plate as well.

Goose Gear Jeep JKU Side Cubbies for 2007-2018 Jeep 4 door models.

The Jeep Plate System side cubbies feature a Bullet Line covered Baltic Birch plywood with storage cubbies in front of both roll bar locations in the rear cargo area. The cubbies serve as a great way to square up the rear cargo area and create additional lockable storage compartments. They are designed to work with the Goose Gear JKU Plate.

On 2007-2010 models the rear door does not have a hinge like found on the later models. The hinge cutout is precut into the cubbies and on early model 2007-2010 models you will see the vehicle body through the precut hole.

In Jeeps with a side mount subwoofer you will have to remove the subwoofer and plastic trim for cubby installation.

The Goose Gear plate system for the Jeep JKU is a direct bolt in unit and requires no drilling into your vehicle. The Side Cubbies require the purchase and installation of the Jeep JKU Floor Plate.

* The set of aluminum rails depicted here are not included with the Side Cubbies. The design of the JKU Plate and Cubbies has been updated since this photo was taken, so these rails are no longer necessary for installation of the Cubbies.*

Goose Gear Jeep JKU 60% Seat Delete Bracket

This bracket includes the necessary nuts and washers for installation.

With the 60% seat delete bracket you can now remove the 60% passengers side rear seat and retain the 40% seat. Bracket is powder coated black steel.

Installation requires basic hand tools and some mechanical ability.

The Goose Gear Jeep JKU Plate System is now available for 2007-2017 Jeep 4-door models.

The Jeep Plate System features a Bullet Liner covered Baltic Birch plywood. This plate allows the user to easily install various Jeep Specific modules including single and double drawer systems as well as the ever famous Icebox module and the new CampKitchen 2.3 for Jeeps. The plate system also makes a great platform for securing your own storage or gear including dog crates, other fridge slide brands, etc.

Installation requires the permanent removal of the plastic trim in the rear cargo area. For 2007-2010 Jeeps there is typically carpet around the wheel well area. In later model Jeeps 2011+ the carpet is not there and once the plastic trim is removed the exposed painted metal of the Jeep body will be visible. 

* The set of aluminum rails depicted here are not included with the Plate System. The design of the Plate and Cubbies has been updated since this photo was taken, so these rails are no longer necessary for installation of the Cubbies.*

In 2011-2014 Jeeps with a SIDE MOUNTED subwoofer you will have to remove the side subwoofer as well as any plastic trim.

In 2015-2018 Jeeps with a Factory Subwoofer installed in the FLOOR of the Jeep you need to order the Factory Floor Subwoofer Option.

Please note: The Goose Gear plate system for the 2007-2010 Jeep JKU requires drilling and installation of threaded inserts into the vehicle floor. Due to the shear lack of anchor points in this year range we had to resort to having our customers drill into their rigs for the plate system to work properly. The plate system will ship with the threaded inserts as well as the tool to install them.

Product weight is only 38.1 pounds.

Notes for Ursa Minor Campers:

If you have or plan to add an Ursa Minor camper top to your Jeep, please note the following conditions:

1. IceBox with Top drawer will not clear the gas struts for the rear window. You can fit an IceBox or a CampKitchen without any issues.

2. 19" and 22" tall Double Drawer Modules will not clear the gas strut for the rear window. You can run a 15" tall double drawer module without clearance issues.

Goose Gear Jeep JKU Sleep Platforms come in 60% Passenger Side and 40% Drivers Side and can be combined to create a 100% second row delete.

 Jeep JKU 60% Sleeping Platform for Floor Plate System 2007-2018 Jeep 4 door models. Passenger Side

Jeep JKU 40% Sleeping Platform for Floor Plate System 2007-2018 Jeep 4 door models. Drivers Side

The 60% sleeping platform is a bolt in replacement for the 60% rear seat delete. With this platform you get two storage access doors and all necessary hardware to bolt it to the vehicle at factory anchor points without drilling and anchor points to attach it to the Jeep JKU Floor Plate System which is required to install the platform. If you are installing just the 60% delete you will need to own or purchase a 60% Seat Delete Bracket. This kit DOES NOT include the Jeep JKU Plate System or the rear seat delete bracket, you can get more information about the rear seat delete bracket here https://www.goose-gear.com/products/jeep-jku-60-seat-delete-bracket.

The 40% sleeping platform is a bolt in replacement for the drivers side second row seat. With this platform you get two storage access doors and all necessary hardware to bolt it to the vehicle at factory anchor points without drilling and anchor points to attach it to the Jeep JKU Floor Plate System which is required to install the platform.

The Goose Gear plate system and sleeping platform for the Jeep JKU are direct bolt in units and require no drilling into your vehicle for model years 2011-2018, model years 2007-2010 require the installation of Rivnuts into the floor of the Jeep.

Also makes a great platform for securing your own storage or gear including dog crates, other fridge slide brands, etc. If you have or plan to run an Ursa Minor J30 this also makes a great stepping platform.

The Goose Gear Jeep JL 2 Door Plate System is now available for 2018 - Present models.

The Jeep Plate System features a Bullet Liner covered Baltic Birch plywood. This plate allows the user to easily install various Jeep Specific modules including single and double drawer systems as well as the ever famous Icebox module and the CampKitchen. The plate system also makes a great platform for securing your own storage or gear including dog crates, other fridge slide brands, etc. Due to the extra depth of the 2 door plate you can use the deeper modules such as the 36" deep Single Drawer Modules and the 28" deep Double Drawer Modules. You can also use the standard IceBox and CampKitchen units including the CampKitchen 2.2 for the National Luna Weekender 50/52.

Installation requires the permanent removal of the top layer of carpet and is completely bolt in and requires no drilling into your vehicle.

Important Notes on Module Dimensions - With the JL Plate system we offer a subwoofer version as well as a non subwoofer version which has an access door for the in floor factory cubby. Both plates accept 19-3/16" wide standard modules like the IceBox, CampKitchen and drawer modules. On the opposite side of the 19-3/16" wide modules you can use the 20-3/16" module widths.

Product weight is only 42.5 pounds.

Goose Gear Jeep JLU 60% Seat Delete Bracket

With the 60% seat delete bracket you can now remove the 60% passengers side rear seat and retain the 40% seat. Bracket is powder coated black steel.

Installation requires basic hand tools and some mechanical ability.

This bracket includes the necessary nuts and washers for installation.

The Goose Gear Jeep JLU Plate System is now available for 2018+ Jeep JLU 4-door models.

The Jeep Plate System features a Bullet Liner covered Baltic Birch plywood. This plate allows the user to easily install various Jeep Specific modules including single and double drawer systems as well as the ever famous Icebox module and the new CampKitchen 2.3 for Jeeps. The plate system also makes a great platform for securing your own storage or gear including dog crates, other fridge slide brands, etc.

Installation requires the permanent removal of the carpet flooring between the two sides panels of factory plastic. Access to the factory jack will remain with a removable part.

*** THE JLU PLATE FOR NON SUBWOOFER EQUIPPED VEHICLES ***
You now have the option to choose which side of the vehicle the access door is installed into. The image shown reflects the access door shown on the passenger side.

Please select the appropriate position for your build, Drivers Side Access or Passenger Side Access.

Important Notes on Modules and Fridges

Due to the large factory subwoofer located on the passenger side of the vehicle and the shallow depth there are some notes to take into consideration when outfitting with refrigerators and or storage modules.

Subwoofer Version only

Since the factory subwoofer protrudes into the vehicle space quite a bit we have had to reduce the width of the modules offered to our standard 19-3/16" width and paired it with a new line of 18-3/16" wide modules. Which means you can install an IceBox or a Campkitchen in the 19-3/16" width and pair it with a single or double drawer module that is 18-3/16" wide.

NON-Subwoofer Version only

Since the Jeep JL Interior is quite a bit narrower we have had to reduce the width of the modules offered to our standard 19-3/16" width and paired it with a new line of 20-3/16" wide modules. Which means you can install an IceBox or a Campkitchen in the 19-3/16" width and pair it with a single or double drawer module that is 20-3/16" wide.

Fridge locations in the Jeep JL

The depth of the Jeep JL interior is shorter than the JK and therefore, if you are planning on using a CampKitchen or IceBox module you will only be able to fit an Engel 45, or the Dometic CXF40, ONLY if you remove the rear handles. On the passengers side there is more depth and you can fit the ARB 50 or similar sized fridges.

Product weight is only 28.1 pounds.

Goose Gear Jeep JLU Sleep Platforms come in 60% Passenger Side and 40% Drivers Side and can be combined to create a 100% second row delete.

Jeep JLU 60% Sleeping Platform for Floor Plate System 2018+ Jeep 4 door models. Passenger Side

Jeep JLU 40% Sleeping Platform for Floor Plate System 2018+ Jeep 4 door models. Drivers Side

The 60% sleeping platform is a bolt in replacement for the 60% rear seat delete. With this platform you get two storage access doors and all necessary hardware to bolt it to the vehicle at factory anchor points without drilling and anchor points to attach it to the Jeep JLU Floor Plate System which is required to install the platform. If you are installing just the 60% delete you will need to own or purchase a 60% Seat Delete Bracket. This kit DOES NOT include the Jeep JLU Plate System or the rear seat delete bracket.

Seat delete bracket can be found here

The 40% sleeping platform is a bolt in replacement for the drivers side second row seat. With this platform you get two storage access doors and all necessary hardware to bolt it to the vehicle at factory anchor points without drilling and anchor points to attach it to the Jeep JLU Floor Plate System which is required to install the platform.

The Goose Gear plate system and sleeping platform for the Jeep JLU are direct bolt in units and require no drilling into your vehicle for model years 2018+.

Also makes a great platform for securing your own storage or gear including dog crates, other fridge slide brands, etc. If you have or plan to run an Ursa Minor J30 this also makes a great stepping platform.

With the Goose Gear Jeep JLU Stealth Sleep Package, you get the rear plate system as well as the complete second row delete system. Turning the back of your Jeep into a flat and open storage and sleep solution. With ample storage below the second row delete you have storage at the lowest point in the interior which is great for Center of Gravity.

By purchasing the combo kit you are saving $75.00 off of normal prices.

This package includes the following:

Jeep JLU Rear Plate System, select Subwoofer or Non-subwoofer version as well as cubby access door location on drivers or passengers side.

See more information on the JLU Rear Plate Pages Here
Jeep JLU Without Sub
Jeep JLU With Sub

Second Row Delete Plates

Drivers Side 40%
Passengers side 60%

Please refer to the notes on each product page for additional information. Images shown are of the Subwoofer version and vary slightly from the non-subwoofer version.

The Goose Gear Jeep TJ Plate system is the foundation for adding various Goose Gear Modules, including the CampKitchen, IceBox and drawers.

Overall drawer width is 34-3/8" for side x side modules. If you are using a CampKitchen or an IceBox Module you can also add a single or double drawer module that is 15-3/16" wide. CampKitchen and IceBox Modules can be place on drivers or passengers side with the drawer on either side.

The TJ Plate System is 100% bolt in and allows the use of the factory tie down footman loops in the vehicle floor. As with all of the Goose Gear Plate Systems it also includes pre-installed anchor points for all Goose Gear Modules designed for the Jeep TJ.

CampKitchen 2.1 and 2.3 will fit in the Jeep TJ.

IceBox and Icebox with Top Drawer models that are 25" and 28" depth fit in the Jeep TJ,

Double Drawer Modules must be mounted on the Passenger side of the vehicle to clear the door strike.

With the Goose Gear Land Cruiser Plate Systems you can now easily install and remove Goose Gear Modules with simple hand tools. This system requires the removal of the rear factory carpet kit. Does not require cutting or drilling of any part of the vehicle. Once the plate is installed you now have a clean and flat surface perfect for mounting Goose Gear Modules or your own storage system and accessories.

The Version 2.1 LC 100 plate is designed to accept the LC 100 seat delete and sleep platform options as well as the new, wider and longer 24-3/16"w x 40"d drawer modules to make use of every possible inch of space.

Plate systems are designed to accommodate all Goose Gear Modules and include all required anchors pre-installed into the plate to secure the modules.

Includes fasteners to secure plate system to vehicle using existing threaded inserts within vehicle body.

Extremely light weight for its strength, the weight of the plate is 39 pounds.

This unit requires the removal of the rear carpet.

Goose Gear Land Cruiser 100 Series Seat Delete / Sleeping Platform

With the 100 Series Low Profile sleeping platform you can now set up your rig for stealth camping and get comfortable. This version is the optimum height for utilizing your rig as a sleeping platform with the most headroom.

Available in 40% seat delete for the Passenger side and 60% for the drivers side you can run both and get a 100% seat delete. Both seat deletes require the 100 Series Plate System Version 2. 

The low profile sleep platform requires the removal of the second row seat backs and seat bottoms.

None of the sleep platforms require drilling or cutting and require simple hand tools for installation.

With the Goose Gear Land Cruiser Plate Systems you can now easily install and remove Goose Gear Modules with simple hand tools. This system requires the removal of the rear factory slide and carpet kit. Does not require cutting or drilling of any part of the vehicle. Once the plate is installed you now have a clean and flat surface perfect for mounting Goose Gear Modules or your own storage system and accessories.

Plate systems are designed to accommodate all Goose Gear Modules and include all required anchors pre-installed into the plate to secure the modules.

Includes fasteners to secure plate system to vehicle using existing threaded inserts within vehicle body.

Extremely light weight for its strength, the weight of the plate runs around 47 pounds.

With the Goose Gear Land Cruiser Plate Systems you can now easily install and remove Goose Gear Modules with simple hand tools. This system requires the removal of the rear factory slide and carpet kit. Does not require cutting or drilling of any part of the vehicle. Once the plate is installed you now have a clean and flat surface perfect for mounting Goose Gear Modules or your own storage system and accessories.

The all new version 2 of the LC80 plate is designed to work with the Goose Gear rear seat deletes and sleep platforms.

Plate systems are designed to accommodate all Goose Gear Modules and include all required anchors pre-installed into the plate to secure the modules.

Includes fasteners to secure plate system to vehicle using existing threaded inserts within vehicle body.

This plate is designed for the complete removal of the vehicles third row of seats.

Extremely light weight for its strength, the weight of the plate runs approximately 45 pounds.

All plate models require the removal of the rear carpet, underlayment foam and some plastic trim pieces. 

Wider Modules for the 80 Series Version 2 Plate.

The version two plate features widened anchor points for Goose Gear Modules. This means you can run an IceBox or a CampKitchen and a single or double drawer that is up to 24-3/16" wide and for single drawers they are now offered in 36" and up to 40" length. If you choose to add standard profile sleep platforms you will need to select the 24-3/16" wide x 8" high x 40" deep modules or the Side x Side Module at 43-3/8" wide x 8" high x 40" deep.

Plate weight is 30 pounds

Goose Gear Land Cruiser 80 Series Second Row Seat Delete / Low Profile Sleeping Platform

With the 80 Series Low Profile sleeping platform you can now remove the second row seats and set up your rig for stealth camping and get comfortable. This version is the optimum height for utilizing your rig as a sleeping platform with the most headroom.

Available in 50% seat delete for the Passenger side and 50% for the drivers side you can run both and get a 100% seat delete. Both seat deletes require the 80 Series Plate System Version 2

The low profile sleep platform requires the removal of the second row seat backs and seat bottoms.

None of the sleep platforms require drilling or cutting and require simple hand tools for installation.

Goose Gear Land Cruiser 80 Series Standard Profile Second Row Seat Delete / Storage and Sleeping Platform

With the 80 Series standard profile sleeping platform you can now remove the second row seats and set up your rig for stealth camping and get comfortable. Below the seat deletes there is a cavernous amount of secure and lockable storage as well. This version is the optimum height for tying into the double drawer modules or the CampKitchen and Single Drawer Modules. These seat delete platforms will bolt directly to either side or both sides of the Ultimate Chef 80 System. 

Both seat delete platforms require either the side x side drawer module or a single drawer and LC80 Utility Cabinet to secure at the rear section of the seat delete. They are designed to work with the 8" tall modules only.

Available in 50% seat delete for the Passenger side and 50% for the drivers side you can run both and get a 100% seat delete. Both seat deletes require the 80 Series Plate System Version 2 and drawer or utility modules mentioned above.

None of the sleep platforms require drilling or cutting and require simple hand tools for installation.

Last five pictures shown reflect the addition of the Ultimate Chef 80 System in the third row seating area and are not including in this product.

The Goose Gear Land Cruiser Utility/Storage module is designed to fit behind a CampKitchen 2.2 Module and creates the necessary support for the Land Cruiser Drawer Top Plates. By adding this module behind the CampKitchen in your Land Cruiser you gain the correct support for the various flat panels that go on top of the drawer modules.

Includes lockable hatch door that is coated in bed liner material to match our other plate system products.

Land Cruiser 80 and 100 Utility/Storage Module measures 19-3/16"w x 8"h x 10"d

Land Cruiser 200 Utility/Storage Module measures 19-3/16"w x 9-1/2"h and 10"d.

With the Goose Gear GX470 and GX460 plate system you can now easily install and remove Goose Gear Modules with simple hand tools. This system requires the removal of the third row seat and carpet kit. Does not require cutting or drilling of any part of the vehicle.

Once the plate is installed you now have a clean and flat surface perfect for mounting Goose Gear Modules or your own storage system and accessories.

Please select the model that best fits your vehicle.

2003-2009 1st Gen GX470

2010-Present 2nd Gen GX460

2010-Present 2nd Gen GX460 WITH FACTORY 3RD ROW AIR CONDITIONING

Includes fasteners to secure plate system to vehicle using existing threaded inserts within vehicle body.

Current lead-time is 3-4 weeks to ship or pick up.

Extremely light weight for its strength, the weight of the plate is less than 35 pounds.

All plate models require the removal of the rear carpet, underlayment foam and some plastic trim pieces. The complete removal of the third row seats as well.

Due to the layout of the rear plastic in the GX460, two infill panels are provided which require the end user to attach them to the base plate. You can also, at your own option, drill three holes into the side plastic trim to assist in securing the infill panels for a cleaner look.

This Goose Gear Plate System fits current model Ram Trucks with a 6.5' bed.

The Goose Gear 4Runner 5th Gen Stealth Sleep and Storage Package is a complete solution for those wanting a minimalist approach to camping with ample storage. The storage capacity on this layout is quite a bit more than most expect. With storage within the Side X Side Drawers as well as below the elevated second row seat delete platforms. This combo kit is designed around our best selling 10" tall Side X Side Module. By purchasing the combo kit you save $150.00 versus purchasing the items individually.

The kit includes the Rear Plate System, the Side X Side Drawer Module as well as both of the 2nd row standard profile seat deletes.

Stealth Sleep and Storage Package for the 5th Gen 4Runner without factory slide out tray.

PT4R-5-STD-SS INCLUDES:

PT4R-5-STD
PT4R-5-SUVSL60-10
PT4R-5-SUVSL40-10
SXS411036-50

Stealth Sleep and Storage Package for the 5th Gen 4Runner with factory slide out tray.

PT4R-5-SLIDE-SS INCLUDES:

PT4R-5-SLIDE
PT4R-5-SUVSL60-10
PT4R-5-SUVSL40-10
SXS411036-50

Stealth Sleep and Storage Package for the 5th Gen 4Runner with factory 3rd row seat is not available yet.

Take your Land Cruiser to the next level in minimalist camping with our Stealth Sleep Package. The Goose Gear Stealth Sleep Package includes the rear plate as well as the second row low profile seat deletes/sleeping platforms.

The second row deletes feature lockable storage compartments to keep your valuables secure.

Overall length is 75.5" from front to rear of vehicle with the front row seats in the full back position.

By purchasing the combo kit you save $75.00 over buying the items separately.

This package includes the following: PLC100-STEALTH

LC100 Rear Plate System PLC100-v2p1
LC100 60% Drivers Side PLC100-LowSL-Drivers
LC100 40% Passengers Side PLC100-LowSL-Pass

Please see each products page for additional information.

The Goose Gear 4Runner 5th Gen Stealth Sleep Package is a complete solution for those wanting a lightweight and minimalist approach to camping. This system is perfect for those looking for maximum space and comfort. The second row seat deletes also provide storage below the deck. By purchasing the combo kit you save $75.00 versus purchasing the items individually.

The package includes the Rear Plate System as well as both of the 2nd row low profile seat deletes.

Stealth Sleep System for the 5th Gen 4Runner without factory slide out tray.

PT4R-5-STD-STEALTH INCLUDES:

PT4R-5-STD
PT4R-5-LOWSL60
PT4R-5-LOWSL40

Stealth Sleep System for the 5th Gen 4Runner with factory slide out tray.

PT4R-5-SLIDE-STEALTH INCLUDES:

PT4R-5-SLIDE
PT4R-5-LOWSL60
PT4R-5-LOWSL40

Stealth Sleep System for the 5th Gen 4Runner with factory 3rd row seat.

PT4R-5-3RD-STEALTH INCLUDES:

PT4R-5-3RD
PT4R-5-LOWSL60-3RD
PT4R-5-LOWSL40-3RD