CARB compliant bayonet style fuel can spout. Fits all NATO style fuel cans with a bayonet closure.
The spout also has an adapter for vehicles with smaller filler receivers.
You may also like
5 lb. Propane Cylinder.
5 lb. propane tank. Compact and light weight.
(DOT 5 lb cylinder 12" H x 8" diameter).
5 lb. Propane Cylinder Bracket. AT's aluminum propane bracket, sized to fit a 5 lb. propane tank. Compact and light weight.
(DOT 5 lb cylinder 12" H x 8" diameter).
10 lb. Propane Cylinder.
10 lb. propane tank. Compact and light weight.
(DOT 10 lb cylinder 17.4" H x 8.9" diameter) .
Contains 2.4 gallons of propane.
AT has designed an aluminum bracket for the Manchester Tank 10 lb propane cylinder.
The brackets are made from 1/8" thick aluminum and have rubber bump stops to hold the cylinder off the bracket. The cylinder is held in place by two stainless steel T Bolt clamps. There are pre-drilled holes in the bracket.
BRACKET:
Size: 12.375" T x 9.5" W x 4.75" D (314mm x 241mm x 120mm)
Weight:2.5 Lbs (1.13 Kg.)
1/8" Thick aluminum
Two Stainless Steel constant tension clamps
The bracket and cylinder combined weight is 17 lbs.(7.7 Kg) and it is 18" tall (457mm) with a maximum diameter of 10.3"(226mm).
CYLINDER:
The Manchester 10 lb propane cylinder that fits into this bracket is 17.4" tall x 8.9" in (442mm x 226mm) diameter and holds 2.4 gallons of propane.
Use the AT Corner Bracket if you want to mount a fuel or water can to the back of your Four Wheel Camper.
The system is used in conjunction with your AT Can Holder and Water Can or Fuel Can.
Order the Corner Bracket, Fuel Can Holder, and Water Can or Fuel Can at the same time and get the complete set up.
Some assembly is required, you will have to drill three mounting holes in the Fuel Can Holder so you can mount the bracket to the Fuel Can Holder. You will also have to drill holes in the aluminum support plate and into the overhang on the camper. If you have fold down rear steps or underbody lighting you may have to notch the holder or plate to accommodate a correct fitment.
Starting in 2018 Four Wheel Campers moved the corner brackets used to attach the camper jacks up one inch above the outside corners to make room for the edge trim. Please let us know in the notes section if your camper has the raised corner brackets. Please also let us know which side, passenger or driver's side the holder is to be mounted, and which model of camper the bracket will be fitted to.
Includes all mounting hardware, does not include can holder or can.
These cans are from the Factory that has been manufacturing them for the military for over 80 years.Original Jerry cans made to the highest specs. Fully paint-coated inside and outside. Equipped with a full internal breather pipe for splash-proof pouring.
The highest quality Jerry can out there. Original Mil Spec. Approved for use in all States, (EPA and CARB approved). Each can comes with a safety spout (pour spout) attached and also has an adapter for vehicles with smaller filler receivers.
- Manufactured from 0.9mm Cold Rolled Steel ( DC 04 EN 10130).
- Dual pan construction. Unique wide channel breather for better smoother pouring.
- Seam welded for extra strength.
- Three Handle Configuration.
- Leakproof Bayonet Closure.
- Locking pin in cap.
- Strengthened hinge on cap to prevent accidental bending when closing.
- Cap designed to hold open when discharging the can.
- Lined inside with fuel resistant Rezol enamel to prevent rusting.
- Painted exterior epoxypolyester powder coat.
- Holds 5 gallons.
- The only Jerry Can like this approved and legal in all States!
- Comes with certified pour spout